"UnKnown" problem Created 17 years ago2007-02-27 07:16:17 UTC by Silver

Well, i tryed to make a Door with Glass... I thoke me 4h to get it right and then there were 101 problems still to be fixed :

1. Why is my door back? (Like is shaddow and only visible with a flashlight... And there is NO problem with lightning

Some piks ->
1. http://img216.imageshack.us/img216/8594/deschool0000qz1.jpg
2. http://img216.imageshack.us/img216/461/deschool0001xy7.jpg

2. Why don't my Door and Glass move at the same time?

Vice versa? (What dose it mean? :()

I made a door with a hole in it, then i placed the glass in there with one side attached to a origin brush and Tied enity for func_door_rotating. The same i did with the door (One origin brush to door, the second to glass...)
Something like that :

you're using source, but using HL1 techniques. read about parenting.

No.. I havent tryed anything rightnow becasue i can't get back to my work computer and i dont know how

I just read some forums and i found a sentance: "The problem is, that your brush is in the air"

Is it true?

Check your Render FX and Mode and be sure that they're both set to "normal." Also be sure that the FX Ammount is set to 255 and that the FX RGB reads 255 255 255.

Thanks a lot dude!!! You should get Aword of the Best Brain

The problem was that i copyed every detail from some tutorials and with that i changed FC Colour (R G B) to 000 255 255 255 did it

Just leave it blank.