Func_walls visible through sky

Soup Miner

Posted 14 years ago2009-05-12 23:34:56 UTC Post #266864

By far, one of the most irritating problems ever. Period. This problem's been plaguing me for weeks. Jump off a cliff and land in a fire.

I've got two totally separate sky boxes, and I can see func_walls through them. Now vis should be blocking them, right? Well it's not, and that's the damn problem. This is the general idea:

Here's what I see from the bottom box, looking up:

And here's what I see looking down from the top box:

BUT WAIT, it gets better, because the only entities that are showing through the sky are func_walls. And some of the func_walls aren't shown through the sky.

Things that don't fix this problem:
-Running full vis
-Moving the top to the bottom, or vice versa
-Using a hint brush to block vis between the two boxes
-Putting a normal brush between the two boxes, either inside or outside the sky

Soup Miner

pimpedz

Posted 14 years ago2009-05-12 23:50:31 UTC Post #266865

Why don't you just move the two boxes away from each other?

pimpedz

Soup Miner

Posted 14 years ago2009-05-13 00:58:33 UTC Post #266867

I would strangle you if I could for saying that.
Edit: The boxes are very, very large, and require a very large draw distance. They're already 768 units apart, and the distance between the closest func_walls is about 2000 units. So unfortunately, spacing them apart won't change anything, and even if I could make them disappear with the draw distance, the wpoly count would still be the same.

Soup Miner

Rimrook

Posted 14 years ago2009-05-13 01:41:32 UTC Post #266868

why don't you surround your sky box with a null box? sky brush aren't generally that solid. Without sky clip, they resemble water.

RimrookSince 2003

Jessie

Posted 14 years ago2009-05-13 03:29:41 UTC Post #266873

Can't you see through a null box anyway?

JessieTrans Rights <3

Soup Miner

Posted 14 years ago2009-05-13 04:59:53 UTC Post #266880

why don't you surround your sky box with a null box? sky brush aren't generally that solid. Without sky clip, they resemble water.

Just finished testing this. Didn't work. God dammit.

Soup Miner

srry

Posted 14 years ago2009-05-13 05:27:08 UTC Post #266882

Do you teleport between the boxes, or what? Depending on how that's set up, you could just toggle the func_walls to disappear with an env_render...

But I want to just clarify, are all the func_walls you're having trouble with nulled on at least one face?

srry

kraken

Posted 14 years ago2009-05-13 06:00:22 UTC Post #266883

can you edit the max view distance to fix it? If your gameplay area isn't big an open, it should work just fine.

edit: just read the actual thread, my bad.

kraken

Soup Miner

Posted 14 years ago2009-05-13 12:42:34 UTC Post #266891

Do you teleport between the boxes, or what? Depending on how that's set up, you could just toggle the func_walls to disappear with an env_render...

Wouldn't work for DM, unfortunately.

But I want to just clarify, are all the func_walls you're having trouble with nulled on at least one face?]

Yes, but so are many of the other entities that can't be seen.
Compiling now with a few func_walls "denulled" to see if it's a fix, but wpoly is going to rise because of it. Be back in about 2 hours with the results.

Soup Miner

The Mad Carrot

Posted 14 years ago2009-05-13 13:18:17 UTC Post #266892

I just made two skyboxes, placed some func_walls in both, changed max view distance to 20000 and went ingame to see if they can be seen through the skybox boundaries. They weren't. Weird.

This is an interesting problem though.

The Mad CarrotMad Carrot

Soup Miner

Posted 14 years ago2009-05-13 13:47:47 UTC Post #266893

You're using ZHLT 3.4 Final, right?

Soup Miner

The Mad Carrot

Posted 14 years ago2009-05-13 14:01:15 UTC Post #266894

Yeah, the one from here: http://twhl.co.za/forums.php?thread=16172

The Mad CarrotMad Carrot

Soup Miner

Posted 14 years ago2009-05-13 14:43:17 UTC Post #266895

Denulling didn't work.

Soup Miner

The Mad Carrot

Posted 14 years ago2009-05-13 15:15:23 UTC Post #266896

You said that some func_walls can be seen through the sky and some not.

Is there a specific difference between those, property wise?

The Mad CarrotMad Carrot

Soup Miner

Posted 14 years ago2009-05-13 15:49:37 UTC Post #266897

Looks like Imageshack didn't like the name of that last picture.
Here it is again:
http://img2.imageshack.us/img2/8043/imagefail.jpg
The only difference between the stone trim on the bottom and the wooden trim on the top is that the stone had nulled faces. But denulling the stone trim didn't fix it, so for that instance, there was no difference between the two other than the texture I used.

This is probably worth noting, now.

This was taken from a hollow box at the very top of the grid, above everything else in the map. There is nothing in this box but point entities and it's textured with the generic black texture.
This greatly disturbs me, because it means that these func_walls are being completely ignored by vis all together.

Edit: Compiling again with the walls change to func_illusionaries...

Soup Miner

=NH= Yodalman

Posted 14 years ago2009-05-13 16:56:04 UTC Post #266899

the only brushes that you said where visible through the skybox where func_walls with "solid" texture rendering mode...

...The answer should hit you right in the face right about now. (I donno how you'll go about fixing it but...)

=NH= Yodalman

Soup Miner

Posted 14 years ago2009-05-13 17:03:35 UTC Post #266900

No. I never said that. God dammit, go die of AIDS.
Why in the name of Satan's firey asshole would I apply solid rendering to a block of stone?

Soup Miner

=NH= Yodalman

Posted 14 years ago2009-05-13 17:06:48 UTC Post #266902

This is what is visible from the bottom box. It's a func_wall with solid rendering

This guy right here is a func_wall, but is NOT visible from the bottom skybox.
There is no nulling on this entity, or anything special about it's setting

there are also func_illusionaries, func_conveyers, and func_waters in both boxes of varying render amounts. None of these other entities can be seen through the skybox brushes.

this is a segment of the many func_walls that are visible through the top brush. they are all trims like this part, and have all been nulled on the bottom face. there is no special rendering on them.

=NH= Yodalman

Soup Miner

Posted 14 years ago2009-05-13 17:16:17 UTC Post #266903

this is a segment of the many func_walls that are visible through the top brush. they are all trims like this part, and have all been nulled on the bottom face. there is no special rendering on them.

there is no special rendering on them.
Christ, do you even read these things before you throw them out there?

Soup Miner

raver

Posted 14 years ago2009-05-13 18:06:52 UTC Post #266904

If you trust me, you can send the rmf + files to me. I can fix it in like 2 mins.

raver

Soup Miner

Posted 14 years ago2009-05-13 19:20:37 UTC Post #266907

???
If it's a two minute job, can't you just tell me what you'd do?

Soup Miner

srry

Posted 14 years ago2009-05-13 19:48:53 UTC Post #266909

Obviously it's classified trade secrets.

Another thing, you haven't by any chance made all the trim into one big func_wall have you? 'Cause I'm going to slap you with a large wet trout if you did.

You need to try and pinpoint the reason that these trim brushes in particular are so special. Try and reproduce the effect if you can. If you can't, then would the error still appear if you simply recreated every one of those trim brushes?

srry

Soup Miner

Posted 14 years ago2009-05-13 21:26:02 UTC Post #266912

Illusionary was a no go.

Another thing, you haven't by any chance made all the trim into one big func_wall have you?

On that note, I just now saw that there are 4, smaller func_walls with the exact same trim setup that can't be seen from the upper box. Of the trims that didn't show up, the most brushes that any func_wall used was 14. The func_walls that are being ignored use... a lot more.

It's not all one entity. There's 13 of them, but they combine a lot of brushes.

For the love of God, don't tell me that they are bypassing vis just because they use a lot of brushes...
Splitting them up now and recompiling.

Soup Miner

srry

Posted 14 years ago2009-05-13 22:09:01 UTC Post #266916

Preparing large wet trout now.

srry

Soup Miner

Posted 14 years ago2009-05-13 22:09:18 UTC Post #266917

Only if the compile turns out successful.

Soup Miner

Posted 14 years ago2009-05-14 03:08:13 UTC Post #266924

Bust out that trout, Srry. Breaking up the func_walls to combine less brushes fixed it. But how was I supposed to know that?

Well, now there's a strong chance that I'll be dealing with "too many visible entities" soon, but that's another problem.

Thanks to everyone who tried to lend a helping hand.

Soup Miner

Strider

Posted 14 years ago2009-05-14 06:12:04 UTC Post #266925

I want pics of this trout/face interaction.

StriderTuned to a dead channel.

srry

Posted 14 years ago2009-05-16 05:51:54 UTC Post #267068

lol, I totally missed this.

/begins slapping World Crafter around with a large wet trout

Brush-based entities cause all kinds of problems when they're that large. Vis won't split them up, so they end up all over your leafs.

srry

The Mad Carrot

Posted 14 years ago2009-05-16 16:43:51 UTC Post #267095

Have you fixed that yet?

The Mad CarrotMad Carrot

Soup Miner

Posted 14 years ago2009-05-16 17:16:01 UTC Post #267105

I've fixed the bottom, but the top has to remain solid. If skylight isn't blocked there, the model prop that goes there isn't lit properly.

Soup Miner

Func_walls visible through sky Created 14 years ago2009-05-12 23:28:07 UTC by Soup Miner