Doors aren't closing Created 17 years ago2006-12-29 17:19:30 UTC by Azoth72

On a map I'm making, I've made two floors. No errors were occurring until I finally made it to the second floor. When I compiled, none of my prop_door_rotating doors were closing. Here's the properties I've set for them.

Properties:
Name: Door01
Parent:
X Y Z: 0 0 0
Global Entity Name:
World model: models/props_c17/door01_left.mdl
Skin: 7
Disable Shadows: No
Slave Name:
Hardware type: Lever
Ajar Angles: 0 0 0
Spawn Position: Closed
Hinge Axis: -4880 2613 70, -4880 2613 70
Rotating Distance: 90
Speed: 120
(I'm sure the sounds are not neccessary)
Delay Before Closed: -1
Damage Inflicted When Blocked: 0
Health: 0
Force Closed: Yes
Open Direction: Open Both Directions

Flags:
Use Closes

This has occurred on all three doors and I don't know whats happening. The Doors open 90 degrees and then they don't close. They were working before, then they just stopped closing.

When 'Delay before closed' is set to -1, the door will not automatically close. Any other value will make the door close after the specified amount of seconds.

It won't close when I manually close it. (Go up to it and press 'e")

yes but it still wont close if it set to -1. Just make a super long delay time?

Okay, I set the delay time to 10 and tried to close it, it still didn't work. It also didn't close even after the 10 seconds. So, I made another map with a prop_door_rotating and tried opening it and closing it; it worked fine. Even when I set the delay time to -1 it worked. Then, I tried to copy and paste the working door into my map with the doors that don't work, and then the working door stopped working.

uncheck toggle

I don't understand, the only flag I have checked is 'use closes'.

perchance it has something to do with the hinges? I've never tried them myself so i wouldn't know anything about them. sry