Sorry, but this is making no sense Created 19 years ago2004-09-27 20:12:46 UTC by Rory

** Executing...
** Command: Change Directory
** Parameters: C:SierraHalf-Life

** Executing...
** Command: Copy File
** Parameters: "C:Half-Life LevelsHLDMbases.map" "C:SierraHalf-Lifevalvemapsbases.map"

** Executing...
** Command: C:PROGRA~1VALVEH~1toolshlcsg.exe
** Parameters: "C:SierraHalf-Lifevalvemapsbases"

hlcsg v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlcsg ---
Command line: C:PROGRA~1VALVEH~1toolshlcsg.exe C:SierraHalf-Lifevalvemapsbases
Entering C:SierraHalf-Lifevalvemapsbases.map
Error: Entity 20 has no visible brushes

Error: No visibile brushes
Description: All brushes are CLIP or ORIGIN (at least one must be normal/visible)
Howto Fix: self explanitory

--- END hlcsg ---

** Executing...
** Command: C:PROGRA~1VALVEH~1toolshlbsp.exe
** Parameters: "C:SierraHalf-Lifevalvemapsbases"

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:PROGRA~1VALVEH~1toolshlbsp.exe C:SierraHalf-Lifevalvemapsbases
>> There was a problem compiling the map.
>> Check the file C:SierraHalf-Lifevalvemapsbases.log for the cause.

--- END hlbsp ---

** Executing...
** Command: C:PROGRA~1VALVEH~1toolshlvis.exe
** Parameters: "C:SierraHalf-Lifevalvemapsbases"

hlvis v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlvis ---
Command line: C:PROGRA~1VALVEH~1toolshlvis.exe C:SierraHalf-Lifevalvemapsbases
>> There was a problem compiling the map.
>> Check the file C:SierraHalf-Lifevalvemapsbases.log for the cause.

--- END hlvis ---

I go to go to brush number, entity 20, "Entity number does not exist"

Fixed it by deleting the origin... but the same problem here, but different type

** Executing...
** Command: Change Directory
** Parameters: C:SierraHalf-Life

** Executing...
** Command: Copy File
** Parameters: "C:Half-Life LevelsHLDMbases.map" "C:SierraHalf-Lifevalvemapsbases.map"

** Executing...
** Command: C:PROGRA~1VALVEH~1toolshlcsg.exe
** Parameters: "C:SierraHalf-Lifevalvemapsbases"

hlcsg v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlcsg ---
Command line: C:PROGRA~1VALVEH~1toolshlcsg.exe C:SierraHalf-Lifevalvemapsbases
Entering C:SierraHalf-Lifevalvemapsbases.map

Current hlcsg Settings
Name | Setting | Default
--------------------|-----------|------------------------
threads [ 1 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
null texture stripping[ on ] [ on ]
clipnode economy mode [ on ] [ on ]
onlyents [ off ] [ off ]
wadtextures [ on ] [ on ]
skyclip [ on ] [ on ]
hullfile [ None ] [ None ]
min surface area [ 0.500 ] [ 0.500 ]
brush union threshold [ 0.000 ] [ 0.000 ]

Using mapfile wad configuration
Wadinclude list :
[zhlt.wad]

0 brushes (totalling 0 sides) discarded from clipping hulls
CreateBrush:
10%...20%...30%...40%...50%...60%...70%...80%...90%...Error: Entity 21, Brush 0, Side 0: plane with no normal
Error: plane with no normal
Description: The map has a problem which must be fixed
Howto Fix: Check the file ZHLTProblems.html for a detailed explanation of this problem

Error: Entity 21, Brush 0, Side 1: plane with no normal
Error: Entity 21, Brush 0, Side 1: has a coplanar plane at (32, 1605, -605), texture +ABUTTONLITE
Error: Entity 21, Brush 0, Side 2: plane with no normal
Error: Entity 21, Brush 0, Side 2: has a coplanar plane at (32, 1605, -605), texture +ABUTTONLITE
Error: Entity 21, Brush 0, Side 2: has a coplanar plane at (32, 1605, -605), texture +ABUTTONLITE
Error: Entity 21, Brush 0, Side 4: has a coplanar plane at (36, 1605, -605), texture +ABUTTONLITE
(0.32 seconds)

--- END hlcsg ---

** Executing...
** Command: C:PROGRA~1VALVEH~1toolshlbsp.exe
** Parameters: "C:SierraHalf-Lifevalvemapsbases"

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:PROGRA~1VALVEH~1toolshlbsp.exe C:SierraHalf-Lifevalvemapsbases
>> There was a problem compiling the map.
>> Check the file C:SierraHalf-Lifevalvemapsbases.log for the cause.

--- END hlbsp ---

** Executing...
** Command: C:PROGRA~1VALVEH~1toolshlvis.exe
** Parameters: "C:SierraHalf-Lifevalvemapsbases"

hlvis v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlvis ---
Command line: C:PROGRA~1VALVEH~1toolshlvis.exe C:SierraHalf-Lifevalvemapsbases
>> There was a problem compiling the map.
>> Check the file C:SierraHalf-Lifevalvemapsbases.log for the cause.

--- END hlvis ---

Agian, entity 21 does not exist, and there are no more origins

ok i to fix the first error with no visible brushes got to the map tab then click go to brush number and put in entity 20 or w/e it is then add the texture to it.
For the next few got to the brush number thing and put in 21 or w/e it and remake the object because it probably has to many slices or w/e or u used vertex tool wrong
Next is +ABUTTONLITE a custom texture cuz if it is then u have to do some other steps but to lazy to explain now. if u think its that then post something and ill tell u what to do or try. ok to much typing im gone

Tryed the 'Check for Problems' tool in Hammer?

Tried*

Yeah, and the three errors that come up dont exist.

Sorry to throw ya out noob4life but you were no where close to the questions lol...Thanks for tryin though...Mabey it was me?

u can try doing Alt-p and fix the error in there

+ABUTTONLITE is that a custom texture

send ur map to my email and ill c what i can do rvpps2rocks@pacbell.net

send ur map to my email and ill c what i can do rvpps2rocks@pacbell.net

crap sry stupid mozilla

Emailing it now, will be a big email.

hey about that mounted gun u can download a prefab if u want or i can download it and put in for u tell me here k thanks and i just got it

Prefab would be nice, and i take it "i just got it" means you fixed it?

didnt have to fix it mine just compile perfectly i dont know y im adding a light which might help when ur playing cuz ur map would be balck with out it and ill get prefab in a sec im gunna test it now

o and this is for cs right

HLDM - - and im doing light at the very end to reduce compile times

Whats HLDM

and email me ur aim sn

All i got is yahoo and msn...Yahoo: waahoo1732002, msn: obvious

go on yahoo i finally created a sn

my yahoo id is nO04LiFe06

my yahoo id is nO04LiFe06

so many posts with such a stupid avatar! AHHH!

i fixed his errror

his error, surely his error was that an entity was covered in origin/clip and not attatched to anything else?

and lol @ the post spammage in this thread :0

texture problem is it not?

entity was covered in origin/clip and not attatched to anything else