Forum posts

Posted 18 years ago2006-02-14 15:25:10 UTC
in Random Mapping Questions Post #163263
The opaque flag doesn't block VIS I'm afraid. About your walls- how do you want to improve them? I find that layering brushes on top of one another, but avoiding them touching as much as possible, can make good-looking rock walls, and judicious use of the clip tool helps.

RE your r_speed question, you'll have to strike a balance between e- and w-polys. What are they on average in your map at the moment?
Posted 18 years ago2006-02-12 11:10:41 UTC
in Reissues Post #162825
I'm up for it. Check out my (unfinished) map in the vault.
Posted 18 years ago2005-12-15 23:01:30 UTC
in Ragdolls don't clip with doors..... Post #152535
You could try verifying your HL2 and Source SDK files. This sounds bizarre.
Posted 18 years ago2005-12-15 22:54:37 UTC
in Crazy clip brush Post #152534
Thanks Kasperg. I think I will just make them only partially sloped near the top, to stop the crates riding up them. And thanks for the ideas hazardous, unfortunately the crates are clipping into the walls already and it looks pretty bad, so I won't use the first one! And it's not vital enough to make me want to go messing with hull files... I'll just moderate my walls slightly. I should be posting the map I'm working on soon- look out for it. Thanks again.
Posted 18 years ago2005-12-15 21:55:15 UTC
in Crazy clip brush Post #152529
Is it possible to make a clip brush that will affect func_pushables, but not the player? The situation is that I have a func_water bordered with sloping walls. If I push the pushable against the walls and shoot them they sail up into the sky..., so I want a clip brush to give the walls a straight edge for the crates, but not for the player. To be honest I'm not sure if this one's fixable, but if anyone's got any ideas I'd be grateful. I like my sloping walls and don't want to get rid of them. I will supply the RMF if desired.
Posted 19 years ago2005-08-23 17:44:22 UTC
in A couple of easy Source q's. Post #129314
There isn't an 'on end touch' flag on the trigger_once, is there? And does anyone know the difference between the scripted_sequence flags? Also- Seventh, when would one want to trigger a trigger_once from another entity? Oh, and you said you'd remove the 3 from my name. :)
Posted 19 years ago2005-08-21 13:13:01 UTC
in A couple of easy Source q's. Post #128850
1) With a trigger_once or other brush trigger what is the difference between 'on start touch' and 'on trigger'?

2) With scripted_sequences, what exactly is the difference between 'no interruptions' and 'override ai'? I know that the latter has a stronger effect but what exactly is the difference?

BTW, I have a problem map in the vault if you fancy taking a look (other problems to these).
Posted 19 years ago2005-08-19 10:04:02 UTC
in HL editing in source Post #128456
Can I use the steam/source hammer to map for HL1? I've installed HL1 and then put it into steam, but it doesn't show up in the games box when I start the SDK. Also, can I safely delete my standard HL installation now it's on steam?
Posted 19 years ago2005-08-09 11:34:34 UTC
in So you want a map? Post #126848
Well, I did expect someone to take the piss... :) If I'm not as good as someone else at designing the layout, but I'm better at actually mapping it, it makes sense to work collaboratively.
Posted 19 years ago2005-08-09 11:15:29 UTC
in So you want a map? Post #126844
OK, so you have a map layout for HL1 but can't be arsed/don't have time/are too noob to map it? Well, I never finish maps because I get bored of them or run out of ideas, so I'm offering my hammering services to anyone with a level plan! HL1 only please, I find Source editing difficult and the textures annoying. I also don't want years of messing about with Worldcraft/Hammer to be wasted! I eagerly await your plans. If you want to see an example of my maps, see this: http://twhl.co.za/mapvault_map.php?id=2857
Posted 19 years ago2005-08-02 12:04:05 UTC
in AI problems- map Post #125385
Yo, I've posted a problem map with a couple of (simple!) AI routines I can't get to work. Thanks in advance in case I can't reply (going away for a few days).
Posted 19 years ago2005-08-01 19:54:07 UTC
in Spawn npc_combine_s and make him rappel Post #125254
Make an npc_metropolice with 'waiting to rappel' and 'template NPC' checked. The latter flag also means that cop won't actually spawn. Give them a name too so you can trigger the rappel of the spawned grunt. Then use an npc_template_maker to spawn your grunt, with the 'template npc' field having the name of the template cop.
Posted 19 years ago2005-07-23 13:17:51 UTC
in Volumetric light Post #122974
Is there a brush entity that can be used for volumetric light?
Posted 19 years ago2005-07-23 13:17:03 UTC
in Faceposer error Post #122973
Posted this a few days ago, and no response! C'mon people!

It was working fine, but now I get the following error at startup: 'Error opening expressionssdk_sample_expressions.txt' and when I click OK it closes. Any help much appreciated.
Posted 19 years ago2005-07-14 07:09:22 UTC
in Regenerating monsters? Post #120751
Make a block the size of the area the monsters will cover, and make it a trigger_hurt. Enter a negative damage value and on flags, check 'No clients' so it doesn't affect the player. Voila! A more elegant method would require coding, but that'll do the job.
Posted 19 years ago2005-07-13 12:37:41 UTC
in Faceposer error Post #120617
It was working fine, but now I get the following error at startup: 'Error opening expressionssdk_sample_expressions.txt' and when I click OK it closes. Any help much appreciated. :P
Posted 19 years ago2005-07-13 12:34:31 UTC
in Video Stress Test and suggestions Post #120616
Thanks for the advice on resolution. I don't want to put texture/mode ldetail from medium to low though! :|
Posted 19 years ago2005-07-12 17:51:06 UTC
in Video Stress Test and suggestions Post #120478
I'll post my fps soon, but I have a question. The only widescreen resolution I can use in source is 1440x900, but this runs much slower than a 1024x768, which I don't want to use because it's stretched. Is there a way I can enable a lower widescreen resolution? I've got a mobility radeon 9700.
Posted 19 years ago2005-04-20 17:45:46 UTC
in The Pope's Passing Post #105034
Start a new thread Habboi.
Posted 19 years ago2005-04-18 09:30:53 UTC
in Respawning objects Post #104633
Use the {INVISIBLE texture, and set the button's render mode to Solid and FX Amount to 255.
Posted 19 years ago2005-04-18 09:27:36 UTC
in walls wont take func_wall? Post #104631
Strange. You could try selecting them all and manually returning them to World, but you'd probably thought of that. :P Curious that it assigned them all to func_walls without you knowing. :nuts:
Posted 19 years ago2005-04-12 17:37:13 UTC
in New Video Card! Post #103572
My laptop can't decide what card it's got- it says Radeon 9600/9700. Wtf? It's 128mb btw, but goes really slow when I turn AA and AF on, even at low levels. It also has two default monitors in the display settings. Is this an error?
Posted 19 years ago2005-04-12 17:29:25 UTC
in Half-Life 2: Aftermath Post #103570
I'll repeat what I quoted before from the interview with the Valve bloke: "You've done critical damage to the Citadel. The whole place is going to go up, taking out City 17 and what's in its immediate radius."
Posted 19 years ago2005-04-12 17:27:45 UTC
in Rappelling combine Post #103568
I made a test map with straight, horizontal glass 1 unit thick, and it works fine. I'll try it with the slanted glass soon. Thanks for your help though.
Posted 19 years ago2005-04-11 16:43:13 UTC
in Half-Life 2: Aftermath Post #103371
Anyone have any thoughts as to the whole blowing up the Citadel thang? (See my post above)
Posted 19 years ago2005-04-09 15:00:45 UTC
in Rappelling combine Post #102801
When the metropolice come down on a rope. It happens quite early on in HL2.
Posted 19 years ago2005-04-09 14:56:28 UTC
in Rappelling combine Post #102797
That's what I thought, but I want them crashing through the glass just for the effect. Any idea how it could be done?
Posted 19 years ago2005-04-09 13:28:03 UTC
in Rappelling combine Post #102769
Okay, I've got a trigger once targeting four metropolice to begin their rappel (and yes, the 'waiting to rappel' flag is checked) They are above a func_breakable_surf with the BreakOnTouch flag on, so it smashes when they hit it. But when I walk through my trigger_once, nothing happens. Any ideas? PS the func_breakable_surf's are at an angle, if that might have anything to do with it.
Posted 19 years ago2005-04-09 13:22:02 UTC
in Half-Life 2: Aftermath Post #102764
From the article: "You've done critical damage to the Citadel. The whole place is going to go up, taking out City 17 and what's in its immediate radius."

So what was the point of killing millions of people just to stop Breen escaping? It's not like Breen is cleverer than the Combine, he wouldn't be much of an asset. Seems a strange plan from the gman. And while Breen is going up towards the teleport he actually says: "Think of the people down below". (Okay, he probably would have said that anyway!) Gordon Freeman should have known better, what with his degree in theoretical physics.
Posted 19 years ago2005-04-08 15:03:12 UTC
in The Pope's Passing Post #102556
Jahzel, if you're saying that you were using his homosexuality as a point which contradicts his claims as a conservative christian, then I'm sorry for accusing you. :)

And Kasperg, it's not such a simple dichotomy of people either not doing anything the church says or doing everything the church says. The church's policy in Africa and other places will have caused deaths, because some people who don't take the church's advice on monogamous living (i.e. they sleep around) will take it's advice on the efficacy of condoms and not use them. People won't follow the church's ideals if they're not a part of that church, but by telling people condoms are ineffective in preventing the spread of HIV the church is making a scientific claim which will be accepted when there is no other information available, even if people are not christians themselves.
Posted 19 years ago2005-04-08 14:51:07 UTC
in Npc, why to die ? Post #102551
In HL1 the gman was invincible, I imagine this is the same for HL2. If this is correct you won't have to do anything!
Posted 19 years ago2005-04-07 16:47:28 UTC
in The Pope's Passing Post #102351
I know full well the church didn't force people to abandon condoms, but they still spread misinformation which people have believed and contracted HIV as a result. The people who this affects the most do not have access to such a range of knowledge as ourselves. If you were in an African village and the only information available to about contraception was from the Roman Catholic church, and you suffered as a consequence, how would you feel? And as for your parachuting analogy, if we all practised abstinence in order to defeat HIV the human race would soon be extinct. Simple, huh?
Posted 19 years ago2005-04-07 15:32:53 UTC
in The Pope's Passing Post #102325
I'm not a Christian, and I don't know much about the pope. I was still slightly saddened to hear of his death, but no more than when I hear of people being blown up in Iraq or wherever else. He did some good things, no doubt. He was the first pope to appoint black archbishops, for example. But some of his ideas were just plain stupid, and someone in a position of power should be expected to research issues properly instead of being judgemental. To quote the director of Christian Aid:

"We were disappointed that he did not realise the Roman Catholic policy on condoms actually contributed to many deaths in the fight to control HIV/AIDS." Daleep Mukarji, 4th April

And Jahzel, why are you against one form of prejudice ("Arnold is a racist scumbag") but not another ("Arnold is a homosexual"). Perhaps it was just a flippant comment, but even so it doesn't help.
Posted 19 years ago2005-04-06 14:45:30 UTC
in Cstrike completely knacked Post #102065
Thanks Seventh it's working fine now. :D
Posted 19 years ago2005-04-06 12:16:58 UTC
in Cstrike completely knacked Post #102034
Last time I played cstrike steam updated it. A few seconds after I joined a server it crashed back to the desktop with an error message (doubt it would help) and then steam started updating my steam client. It now thinks I don't have cstrike installed and offers to download it when I try to play. The game files are all there still. At a guess the problem is that it updated cstrike before the steam client instead of after. I'm not downloading it so can anyone help?
Posted 19 years ago2005-04-01 16:32:20 UTC
in compille...can you? Post #100606
Well unless you installed HL2 to the directory C:hl then that is wrong. It should be $SteamUserDirhalf-life 2 where SteamuserDir is your steam username. That should be in the Program filesValve directory. And you shouldn't have your maps in My Documents either. They should be in sourcesdk_contenthl2mapsrc directory. It's interesting that you're having trouble, my Hammer 4 was automatically setup!
Posted 19 years ago2005-04-01 15:34:03 UTC
in compille...can you? Post #100583
You're gonna have to compile your maps sooner or later, it mightaswell be sooner. What exactly is the problem? Will you post your compile window?
Posted 19 years ago2005-04-01 15:32:36 UTC
in Retrieving account info Post #100582
Okay I can map with Hammer 3.4 now. Habboi did you mean how will I know if they work with Steam? I suppose I'll just release them to the hungry gamers of TWHL. :P
Posted 19 years ago2005-04-01 11:51:07 UTC
in Retrieving account info Post #100530
The input/output system makes entity work easier but to make a decent source map requires a lot more detail, which means more time, effort etc. Yep, I'm just lazy ;) . Anyway, to cut a long story short I can't get my (legitimate) copy of HL1 to register with steam, but I've installed Hammer 3.4 etc. so I can map. But will my maps be useable for people using HL1 with steam?
Posted 19 years ago2005-04-01 10:45:40 UTC
in Retrieving account info Post #100517
SORRY I found it. I had to log out first. I'll make the waste of your time up to you by producing a quality HL1 map if/when I can- my CD-key's not working.
Posted 19 years ago2005-04-01 10:43:00 UTC
in Retrieving account info Post #100516
Where is the option in Steam to 'retrieve account info'? It's described in Valve's help page but I can't find it. Plz help, I'm trying to reinstall HL1 to do some classic mapping (Source so hard!). :confused:
Posted 19 years ago2005-03-31 12:43:02 UTC
in Reinstalling HL1 Post #100371
I know, it's genetic. :D Btw Seventh you can delete my two old user accounts, namely LlamaRama and LlamaRama2. I've downloaded my map from the vault and I'll put it up under my current name.
Posted 19 years ago2005-03-31 12:30:58 UTC
in Mappers Needed for Project HeadCrab Post #100367
Interesting. If a headcrab player takes over one of the humans, can they use their weapons?
Posted 19 years ago2005-03-31 12:26:06 UTC
in Reinstalling HL1 Post #100362
Yeah but I can't remember my old account details, hence me trying to retrieve the account info. But I can't find this button anywhere.
Posted 19 years ago2005-03-31 10:18:22 UTC
in Reinstalling HL1 Post #100350
Tried that but it says my CD key has already been registered to anothe steam account. :( I may have registered it under a different steam account on my old pc, and the steam help says to 'start steam and click the retrieve account info button, but I see no such button...
Posted 19 years ago2005-03-31 09:02:54 UTC
in Reinstalling HL1 Post #100341
How do I install HL1 over HL2, steam etc.?
Posted 19 years ago2005-03-30 22:02:59 UTC
in Song you are listening to [closed] Post #100285
Monkey Magic- the theme tune to the Japanese comedy 'Monkey'.
Posted 19 years ago2005-03-30 22:01:41 UTC
in Book your reading currently Post #100284
The Unconsoled by Kazuo Ishiguro- slightly surreal story of a brilliant but thoroughly incompetent pianist.
A short history of chinese philosophy by Fung Yu-Lan.
The Silent Takeover: global capitalism and the death of democracy by Noreena Hertz. This is ok so far, nothing special. At the moment mostly number-crunching, I'm interested to see her solutions to the inequity of our economic system.
Posted 19 years ago2005-03-30 20:08:50 UTC
in more questions. Post #100267
I think you can only have water at one level, but I may be wrong! You could try compiling a map with water at two levels.

To fix the texture, you'll have to open the texture application tool from the left menu, select the offending texture and change it's rotation. This tool also has very useful commands such as centre the texture on the brush 'C' and fit the texture 'F'. Have a play around.
Posted 19 years ago2005-03-30 12:17:39 UTC
in Big brother is watch you! Post #100132
Nice. You gonna post the model file? :D