Forum posts

Posted 18 years ago2006-09-11 07:48:23 UTC
in Help Plz Post #196276
Thanks SRRY. That fixed my problem. The ZHLT FINAL version i was using was not working at all. Thanks :)
Posted 18 years ago2006-09-09 20:55:52 UTC
in Help Plz Post #196112
srry, were your problems like mine were........ (See Log above)
Posted 18 years ago2006-09-09 15:35:43 UTC
in Help Plz Post #196080
I found my problem. I couldnt get the ZHLT tools to work. All I did was use the compiling tools that came with Hammer and everything is fine.
Posted 18 years ago2006-09-04 18:56:21 UTC
in Help Plz Post #195643
Ok. I finally got my test map to compile and work and everything was fine. But I couldnt get ZHLT tools to work. I ended up having to use qcsg, qbsp2, vis, and qrad. When I download the 32 bit ZHLT tools it wouldnt even try to compile Even when I went in to configuration and redid my directories where my tools are, the maps wont even try to compile. Its like the log i posted at the beginning of this forum. I spent several hours since then building other maps just to play and they worked fine. I finally started making one I wanted to make and now it says i have leaks. I have combed every inch that i can see all around the map. I cannot find a leak anywhere. I even went as far as taking the grids down to 1 and going over it. ( I am still using the crappy tools since I cannot get ZHLT to work).

So basically, what am I doing wrong to make the ZHLT tools not work and the crappy ones try.
Posted 18 years ago2006-09-04 00:27:21 UTC
in Help Plz Post #195529
LOL that was partially what was confusing me. It said error, then said it was sucessful......... :
Posted 18 years ago2006-09-04 00:15:25 UTC
in Help Plz Post #195527
Ok I will try that.

I am using Hammer 3.4 and using ZHLT 64 bit tools.

Thx fer the reply. I will do the tutorial.
Posted 18 years ago2006-09-03 15:53:37 UTC
in Help Plz Post #195499
Ok, Sorry about being in the wrong forum....... here is my question again. =-)

Guyz, this is my first map i made during the tutorial. I am needing help with compiliing. I have made 4 different ones and after pressing alt p, it is showing no errors. Here is the error i am getting.

** Executing...
** Command: C:PROGRA~1Steamhlbsp.exe
** Parameters: "dizzy.map"
  • Could not execute the command:
C:PROGRA~1Steamhlbsp.exe "dizzy.map"
  • Windows gave the error message:
"The operation completed successfully."

** Executing...
** Command: C:PROGRA~1Steamhlcsg.exe
** Parameters: "c:program filessteamnewmapsdizzy"
  • Could not execute the command:
C:PROGRA~1Steamhlcsg.exe "c:program filessteamnewmapsdizzy"
  • Windows gave the error message:
"The operation completed successfully."

** Executing...
** Command: C:PROGRA~1Steamhlbsp.exe
** Parameters: "c:program filessteamnewmapsdizzy"
  • Could not execute the command:
C:PROGRA~1Steamhlbsp.exe "c:program filessteamnewmapsdizzy"
  • Windows gave the error message:
"The operation completed successfully."

** Executing...
** Command: C:PROGRA~1Steamhlvis.exe
** Parameters: "c:program filessteamnewmapsdizzy"
  • Could not execute the command:
C:PROGRA~1Steamhlvis.exe "c:program filessteamnewmapsdizzy"
  • Windows gave the error message:
"The operation completed successfully."

** Executing...
** Command: C:PROGRA~1Steamhlrad.exe
** Parameters: "c:program filessteamnewmapsdizzy"
  • Could not execute the command:
C:PROGRA~1Steamhlrad.exe "c:program filessteamnewmapsdizzy"
  • Windows gave the error message:
"The operation completed successfully."

** Executing...
** Command: Copy File
** Parameters: "c:program filessteamnewmapsdizzy.bsp" "C:Program FilesSteamnewmapsdizzy.bsp"

** Executing...
** Command: Copy File
** Parameters: "c:program filessteamnewmapsdizzy.pts" "C:Program FilesSteamnewmapsdizzy.pts"

** Executing...
** Command: C:PROGRA~1SteamSteam.exe
** Parameters: +map "dizzy" -game cstrike -dev -console +deathmatch 1

Any help would be greatly appreciated.

Thanks.
Posted on 03 Sep 06, 17:51
by Idaho
-first map
-game cstrike
-should be posted in the right forum
Others are probably better at diagnosing hl steam errors than myself, are you using the Steam SDK or the external Worldcraft? The compile log shows it executing bsp twice, your path also seems a little strange, how can hlbsp et al be in c:program filessteam? They're usually in steamsteamappsusernamesdketc etc
Posted on 03 Sep 06, 18:04
by Jobabob
Program Files/Steam is just where I extracted my tools when I dled the tools. Do I need to move them ?
Posted 18 years ago2006-09-03 14:33:50 UTC
in Help Please Post #195496
Program Files/Steam is just where I extracted my tools when I dled the tools. Do I need to move them ?
Posted 18 years ago2006-09-03 13:51:54 UTC
in Help Please Post #195493
Guyz, this is my first map i made during the tutorial. I am needing help with compiliing. I have made 4 different ones and after pressing alt p, it is showing no errors. Here is the error i am getting.

** Executing...
** Command: C:PROGRA~1Steamhlbsp.exe
** Parameters: "dizzy.map"
  • Could not execute the command:
C:PROGRA~1Steamhlbsp.exe "dizzy.map"
  • Windows gave the error message:
"The operation completed successfully."

** Executing...
** Command: C:PROGRA~1Steamhlcsg.exe
** Parameters: "c:program filessteamnewmapsdizzy"
  • Could not execute the command:
C:PROGRA~1Steamhlcsg.exe "c:program filessteamnewmapsdizzy"
  • Windows gave the error message:
"The operation completed successfully."

** Executing...
** Command: C:PROGRA~1Steamhlbsp.exe
** Parameters: "c:program filessteamnewmapsdizzy"
  • Could not execute the command:
C:PROGRA~1Steamhlbsp.exe "c:program filessteamnewmapsdizzy"
  • Windows gave the error message:
"The operation completed successfully."

** Executing...
** Command: C:PROGRA~1Steamhlvis.exe
** Parameters: "c:program filessteamnewmapsdizzy"
  • Could not execute the command:
C:PROGRA~1Steamhlvis.exe "c:program filessteamnewmapsdizzy"
  • Windows gave the error message:
"The operation completed successfully."

** Executing...
** Command: C:PROGRA~1Steamhlrad.exe
** Parameters: "c:program filessteamnewmapsdizzy"
  • Could not execute the command:
C:PROGRA~1Steamhlrad.exe "c:program filessteamnewmapsdizzy"
  • Windows gave the error message:
"The operation completed successfully."

** Executing...
** Command: Copy File
** Parameters: "c:program filessteamnewmapsdizzy.bsp" "C:Program FilesSteamnewmapsdizzy.bsp"

** Executing...
** Command: Copy File
** Parameters: "c:program filessteamnewmapsdizzy.pts" "C:Program FilesSteamnewmapsdizzy.pts"

** Executing...
** Command: C:PROGRA~1SteamSteam.exe
** Parameters: +map "dizzy" -game cstrike -dev -console +deathmatch 1

Any help would be greatly appreciated.

Thanks.