help:basic compiling problem Created 18 years ago2005-09-05 00:25:25 UTC by thetroyv

im using the "beggining" sample map, zoners tools, hammer 3.4
ran "check map for problems" no problems found, when i hit run, the hlbsp comes up with the error:
hlbsp: Error: Can't open C:SIERRAHalf-Lifevalvemapsbeginning.p0

almost sure i have my hammer set up correctly, tried using 2 diff fgds (im trying to compile for regular hl)
just starting hl mapping so asking the pros for advice
heres the whole compile log:

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapsbeginning
Error: Can't open C:SIERRAHalf-Lifevalvemapsbeginning.p0

--- END hlbsp ---

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapsbeginning
>> There was a problem compiling the map.
>> Check the file C:SIERRAHalf-Lifevalvemapsbeginning.log for the cause.

--- END hlbsp ---

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapsbeginning
>> There was a problem compiling the map.
>> Check the file C:SIERRAHalf-Lifevalvemapsbeginning.log for the cause.

--- END hlbsp ---

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapsbeginning
>> There was a problem compiling the map.
>> Check the file C:SIERRAHalf-Lifevalvemapsbeginning.log for the cause.

--- END hlbsp ---

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapsbeginning
>> There was a problem compiling the map.
>> Check the file C:SIERRAHalf-Lifevalvemapsbeginning.log for the cause.

--- END hlbsp ---

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapsbeginning
>> There was a problem compiling the map.
>> Check the file C:SIERRAHalf-Lifevalvemapsbeginning.log for the cause.

--- END hlbsp ---

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapsbeginning
>> There was a problem compiling the map.
>> Check the file C:SIERRAHalf-Lifevalvemapsbeginning.log for the cause.

--- END hlbsp ---

hlbsp: Error: Can't open C:SIERRAHalf-Lifevalvemapsbeginning.
p0

Are you sure you type the correct location in the bsp field? And it also says

END hlbsp

alot of times. Maybe you wrote in the location to hlbsp.exe on the other fields.

Yeah... why are you running BSP seven times? Read the setup tutorials?

Also are you keeping all your hl stuff on one disk?

You can see that he is, Weeman.

thats rather odd...runnnig the BSP several times...

>> Check the file C:SIERRAHalf-Lifevalvemapsbeginning.
log for the cause.

ya know, whenever i got this error i'd check it to find a text file with the compile log and the error writen down for you. So you don't usually have to ask..

seven times...so strange

oya theres two log files one has the error-
hlbsp: Error: Can't open C:SIERRAHalf-Lifevalvemapsbeginning.p0

it seems it was just adding the the log file each time i tried

ok i deleted the log and ran in again, this is the new log file

---

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapsbeginning
Error: Can't open C:SIERRAHalf-Lifevalvemapsbeginning.p0

--- END hlbsp ---

---

thanks for all your help guys, no solution yet, seems like its just the ".p0" thing... hope you guys can come up with something with all your mapping magic

Shouldnt it be .rmf? (or .vmf if this is for source)

oh and heres what it said in the grey compile box in hammer:

---

** Executing...
** Command: Change Directory
** Parameters: C:SIERRAHalf-Life

** Executing...
** Command: Copy File
** Parameters: "C:SIERRAHalf-Lifehammermapsbeginning.map" "C:SIERRAHalf-Lifevalvemapsbeginning.map"

** Executing...
** Command: C:SIERRAHALF-L~1hammerzonershlcsg.exe
** Parameters: "C:SIERRAHalf-Lifevalvemapsbeginning"

** Executing...
** Command: C:SIERRAHALF-L~1hammerzonershlbsp.exe
** Parameters: "C:SIERRAHalf-Lifevalvemapsbeginning"

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapsbeginning
Error: Can't open C:SIERRAHalf-Lifevalvemapsbeginning.p0

--- END hlbsp ---

---

does that help?

I havnt seen rad or vis. It might help to run 'em

k ill try em

i turned both vis and rad on (everythings on normal) but in the log file it only shows this i guess it dies before it gets to rad? (the error log is the same as before)-

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapsbeginning
Error: Can't open C:SIERRAHalf-Lifevalvemapsbeginning.p0

--- END hlbsp ---

hlvis v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlvis ---
Command line: C:SIERRAHALF-L~1hammerzonershlvis.exe C:SIERRAHalf-Lifevalvemapsbeginning
>> There was a problem compiling the map.
>> Check the file C:SIERRAHalf-Lifevalvemapsbeginning.log for the cause.

--- END hlvis ---

That's very perculiar. Are you using XP/2000 and NTFS?

I still cant see rad

rad doesn't run if there's a previous error, usually. You don't have to run rad or vis if csg and bsp are producing the correct output.

The biggest thing is there's no output from csg. That accounts for all the later errors, I think.

It looks like csg isn't running at all. Double check that hlcsg.exe is in your zoners folder. Also check that your map file is, indeed, in C:SIERRAHalf-Lifevalvemaps when you save it.

It's immaterial, but there's no need to copy the map file (first command) to where it already is.

Yeah, CSG has to come before BSP. You really have messed up the setup.

im on windows 2000 i have ntfs and my boot partiton has FAT if thats any help...
csg is in the right place, im calling all the right zoner tools..
chswrx01.wad decals.wad and the zoners zhlt.wad are the wads im using,
ok could you give me a rundown of the save-running process?
is it save in hammer/maps? in valve/maps? both? do i need to do any exporting?

thanks for your help

Doesn't really matter where you save the maps, though it's generally a good idea to keep everything on the same partition.

Get CSG going; I doubt it's a file-system problem. Read the tutorials...

ok thanks guys i think you isolated my problem- i just executed csg through explorer, said i didnt have MSVCP60.dll, so i downloaded it, but in the zoners directory, now i have a diff error however-
it says theres a leak and that its my light, and i removed the light now it says its the info_player_start. it seems to be enclosed in the box just fine heres my log though:
thanks again for the help guys
(from the grey compile window)

---

** Executing...
** Command: Change Directory
** Parameters: C:SIERRAHalf-Life

** Executing...
** Command: Copy File
** Parameters: "C:SIERRAHalf-Lifehammermapstest.map" "C:SIERRAHalf-Lifevalvemapstest.map"

** Executing...
** Command: C:SIERRAHALF-L~1hammerzonershlcsg.exe
** Parameters: "C:SIERRAHalf-Lifevalvemapstest"

hlcsg v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlcsg ---
Command line: C:SIERRAHALF-L~1hammerzonershlcsg.exe C:SIERRAHalf-Lifevalvemapstest
Entering C:SIERRAHalf-Lifevalvemapstest.map

Current hlcsg Settings
Name | Setting | Default
--------------------|-----------|------------------------
threads [ 1 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
null texture stripping[ on ] [ on ]
clipnode economy mode [ on ] [ on ]
onlyents [ off ] [ off ]
wadtextures [ on ] [ on ]
skyclip [ on ] [ on ]
hullfile [ None ] [ None ]
min surface area [ 0.500 ] [ 0.500 ]
brush union threshold [ 0.000 ] [ 0.000 ]

Using mapfile wad configuration
Wadinclude list :
[zhlt.wad]

0 brushes (totalling 0 sides) discarded from clipping hulls
CreateBrush:
50%... (0.00 seconds)
SetModelCenters:
50%... (0.00 seconds)
CSGBrush:
50%... (0.00 seconds)

Using Wadfile: sierrahalf-lifechswrx01.wad

• Contains 0 used textures, 0.00 percent of map (22 textures in wad)

Using Wadfile: sierrahalf-lifedecals.wad

• Contains 0 used textures, 0.00 percent of map (16 textures in wad)

Including Wadfile: sierrahalf-lifehammerzonerszhlt.wad

• Contains 1 used texture, 100.00 percent of map (3 textures in wad)

Texture usage is at 0.00 mb (of 4.00 mb MAX)
0.02 seconds elapsed

--- END hlcsg ---

** Executing...
** Command: C:SIERRAHALF-L~1hammerzonershlbsp.exe
** Parameters: "C:SIERRAHalf-Lifevalvemapstest"

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapstest

Current hlbsp Settings
Name | Setting | Default
------------------|-----------|------------------------
threads [ 1 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
nofill [ off ] [ off ]
null tex. stripping [ on ] [ on ]
notjunc [ off ] [ off ]
subdivide size [ 240 ] [ 240 ] (Min 64) (Max 512)
max node size [ 1024 ] [ 1024 ] (Min 64) (Max 4096)

Warning: === LEAK in hull 0 ===
Entity info_player_start @ ( 0, 64, 64)
Error:
A LEAK is a hole in the map, where the inside of it is exposed to the
(unwanted) outside region. The entity listed in the error is just a helpful
indication of where the beginning of the leak pointfile starts, so the
beginning of the line can be quickly found and traced to until reaching the
outside. Unless this entity is accidentally on the outside of the map, it
probably should not be deleted. Some complex rotating objects entities need
their origins outside the map. To deal with these, just enclose the origin
brush with a solid world brush

Leak pointfile generated

** Executing...
** Command: C:SIERRAHALF-L~1hl.exe
** Parameters: -dev -console +map "test"

ok thanks BJ i think you isolated my problem- i just executed csg through explorer, said i didnt have MSVCP60.dll, so i downloaded it, but in the zoners directory, now i have a diff error however-
it says theres a leak and that its my light, and i removed the light now it says its the info_player_start. it seems to be enclosed in the box just fine heres my log though:
thanks again for the help guys
(from the grey compile window)

---

** Executing...
** Command: Change Directory
** Parameters: C:SIERRAHalf-Life

** Executing...
** Command: Copy File
** Parameters: "C:SIERRAHalf-Lifehammermapstest.map" "C:SIERRAHalf-Lifevalvemapstest.map"

** Executing...
** Command: C:SIERRAHALF-L~1hammerzonershlcsg.exe
** Parameters: "C:SIERRAHalf-Lifevalvemapstest"

hlcsg v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlcsg ---
Command line: C:SIERRAHALF-L~1hammerzonershlcsg.exe C:SIERRAHalf-Lifevalvemapstest
Entering C:SIERRAHalf-Lifevalvemapstest.map

Current hlcsg Settings
Name | Setting | Default
--------------------|-----------|------------------------
threads [ 1 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
null texture stripping[ on ] [ on ]
clipnode economy mode [ on ] [ on ]
onlyents [ off ] [ off ]
wadtextures [ on ] [ on ]
skyclip [ on ] [ on ]
hullfile [ None ] [ None ]
min surface area [ 0.500 ] [ 0.500 ]
brush union threshold [ 0.000 ] [ 0.000 ]

Using mapfile wad configuration
Wadinclude list :
[zhlt.wad]

0 brushes (totalling 0 sides) discarded from clipping hulls
CreateBrush:
50%... (0.00 seconds)
SetModelCenters:
50%... (0.00 seconds)
CSGBrush:
50%... (0.00 seconds)

Using Wadfile: sierrahalf-lifechswrx01.wad

• Contains 0 used textures, 0.00 percent of map (22 textures in wad)

Using Wadfile: sierrahalf-lifedecals.wad

• Contains 0 used textures, 0.00 percent of map (16 textures in wad)

Including Wadfile: sierrahalf-lifehammerzonerszhlt.wad

• Contains 1 used texture, 100.00 percent of map (3 textures in wad)

Texture usage is at 0.00 mb (of 4.00 mb MAX)
0.02 seconds elapsed

--- END hlcsg ---

** Executing...
** Command: C:SIERRAHALF-L~1hammerzonershlbsp.exe
** Parameters: "C:SIERRAHalf-Lifevalvemapstest"

hlbsp v2.5.3 rel Custom Build 1.7 (Dec 9 2002)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (merlinis@bigpond.net.au)
--- BEGIN hlbsp ---
Command line: C:SIERRAHALF-L~1hammerzonershlbsp.exe C:SIERRAHalf-Lifevalvemapstest

Current hlbsp Settings
Name | Setting | Default
------------------|-----------|------------------------
threads [ 1 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
nofill [ off ] [ off ]
null tex. stripping [ on ] [ on ]
notjunc [ off ] [ off ]
subdivide size [ 240 ] [ 240 ] (Min 64) (Max 512)
max node size [ 1024 ] [ 1024 ] (Min 64) (Max 4096)

Warning: === LEAK in hull 0 ===
Entity info_player_start @ ( 0, 64, 64)
Error:
A LEAK is a hole in the map, where the inside of it is exposed to the
(unwanted) outside region. The entity listed in the error is just a helpful
indication of where the beginning of the leak pointfile starts, so the
beginning of the line can be quickly found and traced to until reaching the
outside. Unless this entity is accidentally on the outside of the map, it
probably should not be deleted. Some complex rotating objects entities need
their origins outside the map. To deal with these, just enclose the origin
brush with a solid world brush

Leak pointfile generated

** Executing...
** Command: C:SIERRAHALF-L~1hl.exe
** Parameters: -dev -console +map "test"

You have a leak! it's an opening in your level to the outer void. Or that you have an entity out side your level, an entity brush closing your level.

it says theres a leak on the sample map downloaded from this site! (beginning)
i tried making a new one:
make a box, make it hollow with 32 thick walls,
make an entity, (info_player_start)
run and it gives me the error
Warning: === LEAK in hull 0 ===
Entity info_player_start @ ( 0, 64, 64)

the start is in the box in all three dimensions

Good trouble-shooting technique is to change only one thing at a time.

The beginning map (use the .rmf, not the .map) is fine. I just downloaded it and compiled with no problems.

Something else must be the problem.

Go into C:SIERRAHalf-Lifevalvemaps and delete everything named "beginning.*"

Get a fresh copy of "beginning.rmf" (in case you changed something inadvertently), open it in Hammer, hit F9, turn off vis and rad, tick "Don't run the game" and compile without changing anything.

When you're just starting out, correct any problems before continuing.

If that compiles okay, turn on vis and rad and compile. If that's okay, untick "Don't run the game" and see if everything's okay then.

An excellent resource there.

test if its a compile problem by making a simple hollowed cube, a light and a player_start. if that doesnt compile, you got yerself a bug

thanks for all your help, got it working.
looks like theres an error in zoners wad.
whenever i used it it came upwith the leak.
it wasnt in the half life directory though.. i dont know if that could cause the problem... anyhow, i got it working thanks alot!

i think the reason that you were getting a leak with the tut files is because you don't have Halflife.wad loaded. so it doesn't register the textures and deletes the brush or something

deletes the brush

I don't think that's correct. I've compiled maps without the wad I originally used for textures and brushes were never deleted. A default texture was substituted (the pretty purple and black check texture).

I remember that texture! This guy has an avatar of that texture.

That's the texture!

BTW, thetroyv, you still have some sort of problem. Although it's possible, having an "error in a wad" doesn't sound right at all.

It sounds, again, like you're avoiding a problem rather than correcting it.

Good luck.