Fix leaks? Created 19 years ago2004-06-27 17:38:11 UTC by Paintballa

I find now that when i sometimes after i compile it says it cannot find basically everything its looking for. But when i fixed the leak that was in the map everything worked again. Is there a way to find out where your map is leaking from? or how to fix any errors?

use the pointfile. hammer 3.5 has it in the 3d view, but you can also type pointfile in the console (make sure developer is on mind). with both simply follow the line till you see it go from the void to the inside of your map. the hole it goes through its your leak.

where do i find pointfile at in the program? Also how would i go about fixing the leak?

to fix the leak, just either move the ntity in the void back into the map or close up the hole in the map with a brush.

to activate pointfile just choose "load pointfile" then the mapname.pts in the toools menu or type "pointfile" in the console when developer is set to 1

I find it easier to do in HL, the hammer one gets me confused in medium-to-big maps.

Can someone tell me what this means? How can i fix this? Says there is an error when compiling the map.

###################################################

1. Batch Compiler Zoners And Mapster Spec #

###################################################
###################################################

1. Please report bugs to: ryansgregg@hotmail.com #

###################################################

Written At: 6/27/2004 5:58:43 PM
BC Version: 2.0.3.1

hlcsg v2.5.3 rel (May 2 2001)
Based on Valve's version, modified with permission.
Submit detailed bug reports to (zoner@gearboxsoftware.com)
--- BEGIN hlcsg ---
Command line: "C:Program FilesZHLThlcsg.exe"-chart C:ValveSteamSteamAppsp
aintballa7786counter-strikecstrikemapsmattmap.map

= Current hlcsg Settings =
Name | Setting | Default
--------------------|-----------|------------------------
threads [ 1 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ on ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
onlyents [ off ] [ off ]
wadtextures [ on ] [ on ]
skyclip [ on ] [ on ]
hullfile [ None ] [ None ]
min surface area [ 0.500 ] [ 0.500 ]
brush union threshold [ 0.000 ] [ 0.000 ]

Wadinclude list :
[zhlt.wad]

entering C:ValveSteamSteamAppspaintballa7786counter-strikecstrikemapsmat
tmap.map
Error: Entity 13, Brush 0: mixed face contents

Texture !WATERBLUE and !WATERBLUE

Error: mixed face contents
Description: The map has a problem which must be fixed
Howto Fix: Check the file ZHLTProblems.html for a detailed explanation of this p
roblem

Error: Entity 13, Brush 0: mixed face contents

Texture !WATERBLUE and !WATERBLUE

Error: Entity 13, Brush 0: mixed face contents

Texture !WATERBLUE and !WATERBLUE

--- END hlcsg ---

hlbsp v2.5.3 rel (May 2 2001)
Based on Valve's version, modified with permission.
Submit detailed bug reports to (zoner@gearboxsoftware.com)
--- BEGIN hlbsp ---
Command line: "C:Program FilesZHLThlbsp.exe"-chart C:ValveSteamSteamAppsp
aintballa7786counter-strikecstrikemapsmattmap.map
>> There was a problem compiling the map.
>> Check the file C:ValveSteamSteamAppspaintballa7786counter-strikecstrike
mapsmattmap.log for the cause.

--- END hlbsp ---

g_fastvis = true
hlvis v2.5.3 rel (May 2 2001)
Based on Valve's version, modified with permission.
Submit detailed bug reports to (zoner@gearboxsoftware.com)
--- BEGIN hlvis ---
Command line: "C:Program FilesZHLThlvis.exe"-fast -chart C:ValveSteamSteam
Appspaintballa7786counter-strikecstrikemapsmattmap.map
>> There was a problem compiling the map.
>> Check the file C:ValveSteamSteamAppspaintballa7786counter-strikecstrike
mapsmattmap.log for the cause.

--- END hlvis ---

Netvis must be run either as a server (-server)
or as a client (-connect servername)

netvis v2.5.3 rel (May 2 2001)
Based on Valve's version, modified with permission.
Submit detailed bug reports to (zoner@gearboxsoftware.com)

= netvis Options =

-full           : Full vis
-fast           : Fast vis

-connect address : Connect to netvis server at address as a client
-server          : Run as the netvis server
-port #          : Use a non-standard port for netvis
-rate #          : Alter the display update rate

-texdata #      : Alter maximum texture memory limit (in kb)
-chart          : display bsp statitics
-low | -high    : run program an altered priority level
-nolog          : don't generate the compile logfiles
-threads #      : manually specify the number of threads to run
-estimate       : display estimated time during compile
-verbose        : compile with verbose messages
-noinfo         : Do not show tool configuration information
-dev #          : compile with developer message

mapfile         : The mapfile to compile

In netvis one computer must be the server and all the rest are the clients.
The server should be started with : netvis -server mapname
And the clients should be started with : netvis -connect servername

The default socket it uses is 21212 and can be changed with -port
The default update rate is 60 seconds and can be changed with -rate
Mapster version 0.3.2b

Welcome to the first public testing of Mapster!

Updated version! Fixes small bug in netvis path. If you are using
0.3.1b, you will need to manually set your zoners path. Better yet,
update to 0.3.2b and use the fixed version!

Lestat & Waldo

ERROR! Unable to find netvis at path .netvis.exe!
Be sure and install Mapster in the same directory as your zoners
tools.

This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
hlrad v2.5.3 rel (May 2 2001)
Based on Valve's version, modified with permission.
Submit detailed bug reports to (zoner@gearboxsoftware.com)
--- BEGIN hlrad ---
Command line: "C:Program FilesZHLThlrad.exe"-sparse -nopaque -bounce 8 -chart
C:ValveSteamSteamAppspaintballa7786counter-strikecstrikemapsmattmap.map

>> There was a problem compiling the map.
>> Check the file C:ValveSteamSteamAppspaintballa7786counter-strikecstrike
mapsmattmap.log for the cause.

--- END hlrad ---

Must specify either -import or -export
ripent v2.5.3 rel
Submit detailed bug reports to (zoner@gearboxsoftware.com)

Usage: ripent [-import|-export] [-texdata n] bspname
C:ValveSteamSteamAppspaintballa7786counter-strikecstrikemapsmattmap.wic
deleted.
Could Not Find C:ValveSteamSteamAppspaintballa7786counter-strikecstrikema
psmattmap.lin
C:ValveSteamSteamAppspaintballa7786counter-strikecstrikemapsmattmap.lin
deleted.
Could Not Find C:ValveSteamSteamAppspaintballa7786counter-strikecstrikema
psmattmap.p0
C:ValveSteamSteamAppspaintballa7786counter-strikecstrikemapsmattmap.p0 d
eleted.
Could Not Find C:ValveSteamSteamAppspaintballa7786counter-strikecstrikema
psmattmap.p1
C:ValveSteamSteamAppspaintballa7786counter-strikecstrikemapsmattmap.p1 d
eleted.
Could Not Find C:ValveSteamSteamAppspaintballa7786counter-strikecstrikema
psmattmap.p2
C:ValveSteamSteamAppspaintballa7786counter-strikecstrikemapsmattmap.p2 d
eleted.
Could Not Find C:ValveSteamSteamAppspaintballa7786counter-strikecstrikema
psmattmap.p3
C:ValveSteamSteamAppspaintballa7786counter-strikecstrikemapsmattmap.p3 d
eleted.
Could Not Find C:ValveSteamSteamAppspaintballa7786counter-strikecstrikema
psmattmap.prt
C:ValveSteamSteamAppspaintballa7786counter-strikecstrikemapsmattmap.prt
deleted.
The system cannot find the file specified.
mattmap.bsp copied to C:ValveSteamSteamAppspaintballa7786counter-strikecst
rikemaps
The system cannot find the file specified.
mattmap.pts copied to C:ValveSteamSteamAppspaintballa7786counter-strikecst
rikemaps

Press any key to continue . . .

basically, where it first says error: it looks like you've got two brushes tied to a single entity (or 1 world brush and another entity brush) with the same texture !WATERBLUE . where you've put water is a good place to start looking. mixed face contents is your actual error, normally caused by using a texture designed for a specific purpose in conjunction with another texture/entity that it cannot be used with. a good example is making a func_wall out of the clip texture, it doesn't like that at all.

but what might be the problem, is where you have made a brush into func_water, you must remember to texture the whole brush with the water texture.

in hammer, press Alt+P to check for problems (although this won't bring up your error neccesarily).

You can't have !WATERBLUE with a normal texture, either, like you can't have a brush with the GENERIC015k texture and have three sides
!WATERBLUE. Even if it isn't a func_water. It can't find netvis, too.