Commented 11 years ago2013-03-25 19:06:04 UTC
in journal: #8145Comment #60058
I read in the manual that if the red led in on it wont start, i mean you jump the pwr pins nothing happens, the fans don't start up well nothing. Also according to the manual there has to be a AGP card in the system. Ran it without anything still the same.
Commented 11 years ago2013-03-25 17:04:28 UTC
in journal: #8145Comment #60063
Try to get a PCI graphics, and an replacement CPU. If none work the board is dead. Could be RAM as well. What POST beeps does it emit? And are you sure that the PSU is all right as well?
Commented 11 years ago2013-03-25 15:37:58 UTC
in journal: #8145Comment #60057
Well the problem with it is i does nothing when i trigger the power switch. The LED's light up so i am lead to believe it should start up, but it doesnt. I did some reading around that the red led near the AGP port should not light up, its some sort of a protection mechanism so that you dont plug 3.3v graphics cards in there. I have a bunch of AGP cards and it does not matter what card i put in the led is still on and the system wont start. Even leaving the port empty doesnt solve it. Its a AGP pro slot, though older AGP cards are compatible with it. So either i am doing something wrong or the mobo is dead.
Commented 11 years ago2013-03-25 15:05:38 UTC
in journal: #8145Comment #60062
Watch out for that 478 Dell, those motherboards are know for dieing a lot.
As for 604, awesome buy! I bought my self an Dell Precision 470 with 2x Intel Xeon 3.2GHz HT. Will upgrade it soon to 3.8GHz. Tell me the problem the MoBo has, maybe we can solve it.
Commented 11 years ago2013-03-25 04:38:41 UTC
in journal: #8144Comment #48612
Yah I do own it, I started out in my basement, then I finnaly got my professional face on and got a better building for it. And odd, I loaded the link fine, Did the second link load for you?
Commented 11 years ago2013-03-18 22:33:16 UTC
in journal: #8138Comment #50902
Grats! Now dont party too hard. I did that and had a debt of $40,000 USD and no education to speak of. Then i got lucky with a scholarship... but the moral of the story is. DONT FUCK UP!
and good luck And we can help And grats
This comment was made on an article that has been deleted.
Commented 11 years ago2013-03-17 04:11:02 UTC
in journal: #8139Comment #54499
I first found out about it from an SMBC comic iirc, in which a woman shows a guy that if he looks through a small hole made with the fingers it improves focusing, and asks him if he can focus on his nose. When he's distracted she steals his equipment.
And I was afraid of the pipe moving CT, so I made a little rig so that it could be clamped firmly without crushing, and so that only about 5-10mm had to be gripped as it also stopped it from pivoting. By the time I figured out how to do the unsanded bit I had also came up with a rig that let me grip it in a similar way, firmly, with a cloth in between the vice and the pipe. So the whole thing is sanded but one end has marks from the vice that are too deep to easily sand out.
Commented 11 years ago2013-03-17 02:52:01 UTC
in journal: #8139Comment #54500
heh cool idea, i never knew about his either! (now, if i ever get trapped on a deserted island, i can carve some reading glasses? (hopefully i'll at least have a pocket knife) =)
and ya, it's hard to vice copper pipe without denting/maring it.. it's so dam soft. still looks pretty clean to me tho
Commented 11 years ago2013-03-16 21:41:35 UTC
in journal: #8138Comment #50903
It is cStriker.
If I wasn't accepted unconditionally I would've probably got something along the lines of having to achieve at least a C in both advanced higher maths & advanced higher physics.
Commented 11 years ago2013-03-16 09:53:20 UTC
in journal: #8138Comment #50905
I have no idea what you're talking about, since we have a different system here. But if it's about entering a college and you succeeded, then congratulations!
Commented 11 years ago2013-03-16 00:38:05 UTC
in journal: #8138Comment #50904
Congratulations! I will have an Irn Bru to celebrate. Although if you are accepted unconditionally, what kind of conditions would there have been if you weren't?
Also just to be sure check the PSU voltage outputs.
Ran it without anything still the same.
If none work the board is dead.
Could be RAM as well. What POST beeps does it emit? And are you sure that the PSU is all right as well?
The LED's light up so i am lead to believe it should start up, but it doesnt.
I did some reading around that the red led near the AGP port should not light up, its some sort of a protection mechanism so that you dont plug 3.3v graphics cards in there. I have a bunch of AGP cards and it does not matter what card i put in the led is still on and the system wont start. Even leaving the port empty doesnt solve it.
Its a AGP pro slot, though older AGP cards are compatible with it.
So either i am doing something wrong or the mobo is dead.
As for 604, awesome buy!
I bought my self an Dell Precision 470 with 2x Intel Xeon 3.2GHz HT. Will upgrade it soon to 3.8GHz.
Tell me the problem the MoBo has, maybe we can solve it.
Old members always return to this place... it's like internet home for them. That's their fate.
I do a lot of shared subjects with that degree.
And where can we get the lyrics and sheet music for everything else?
I tried few times, but it just starts the counting back from start.
Now dont party too hard.
I did that and had a debt of $40,000 USD and no education to speak of.
Then i got lucky with a scholarship... but the moral of the story is.
DONT FUCK UP!
and good luck
And we can help
And grats
And I was afraid of the pipe moving CT, so I made a little rig so that it could be clamped firmly without crushing, and so that only about 5-10mm had to be gripped as it also stopped it from pivoting. By the time I figured out how to do the unsanded bit I had also came up with a rig that let me grip it in a similar way, firmly, with a cloth in between the vice and the pipe. So the whole thing is sanded but one end has marks from the vice that are too deep to easily sand out.
and ya, it's hard to vice copper pipe without denting/maring it.. it's so dam soft. still looks pretty clean to me tho
If I wasn't accepted unconditionally I would've probably got something along the lines of having to achieve at least a C in both advanced higher maths & advanced higher physics.
The second pic from the top reminds me of the Scar vs Simba fight! xD
That meaning, the smaller the hole, the better the focus will be.
Although if you are accepted unconditionally, what kind of conditions would there have been if you weren't?
Oops. :/
YEAAAHHH