@rufee
Yeah well, bottom end. That's exactly why I wanted an R7 240 and an A4-6300 at first, hahaha. Because that's just overkill compared to what I have.
Now, I use my 2007 laptop for gaming, mapping, texturing, video-editing etc. and it all takes time and is limited a little bit.
However, that's what older software is for! So, 10-year-old laptops can still be used for gaming, but year 2000 gaming, not 2017, 2016, nor even 2007 gaming. Up to 2005 gaming.
Forum posts
"The Core hits 6000 regularly and it runs just fine on a budget laptop."I doubt it would run on my peanut laptop. :3
Edit:
Well, Intel HD Graphics 3000 is perfect for GoldSrc games. That's what lower-budget laptops usually have. But my laptop has an Intel GMA 965, so it's considered an antique laptop, lol.
You mean what it used to measure? xD
It's wrecked now.
It's wrecked now.
But imagine what would've happened if it was actually a mine, lol. My classmate got so close to it, I plugged my ears fearing of an explosion.
On our luck, it turned to be a measuring device, and we showed those 6th-graders that they're wrong. >:D
On our luck, it turned to be a measuring device, and we showed those 6th-graders that they're wrong. >:D
Oh, the caves... if you want I can lend you some pre-made sections. Though, it's best when you learn it yourself, lol.
"I have quite strange tastes."Hah, wait until you see my playlist.
"Oh, and Bevel makes my eyes hurt even more than null does."Well make your own Bevel and Null textures.
I once made my own AAATrigger texture for the lolz (I used my brother's face).
Darn, in Quake there's no Null...
But instead, there's Skip.
But instead, there's Skip.
It's EXCELLENT for lots of stuff...
@Windawz
But you can always toggle the transparency of some textures as well as the visibility of the Null texture.
But you can always toggle the transparency of some textures as well as the visibility of the Null texture.
Lol, I used Null for the terrain in ts_untergrund. The only problems I had were when I converted the terrain into a func_detail. Yeah, MAX_CLIPNODES_EXCEEDED. I did that solely for VIS reasons because it took forever to compile (have you seen the size of that map?).
So I reverted them back to world brushes.
So I reverted them back to world brushes.
Yawn.
It's spring.
Apparently, this is coming back to what it looked like in June 2016.
Now, onto the stuff which is worth mentioning...
So we've recently gone to Daorson, and some 6th-graders claimed to have found a mine. My Nazi classmate and I went up close, and he took this photo:
"Uništavanje ili premještanje kažnjivo"
"Removal or moving it is punishable." (i.e. illegal)
Stupid little kiddies.
But at least I got some nice photos there:
Apart from that, something bad happened to me, but let's not mention that here. It's not as bad as you think.
Also, what THE HECK is this:
OMG, that's so funny! XDDDD
My brother laughed so hard...
Let's see, what else?
I brought my laptop to school to play CS 1.6 with my female counterpart. 
Well, she would've been my counterpart if she was interested in the things I am, so she's not exactly my counterpart, lol.
And last but not least...
drumroll
I tried running BF2 (it's free, by the way) in 64x64...
Hooray! But no fps differences whatsoever.
It's spring.
Now, onto the stuff which is worth mentioning...
"Removal or moving it is punishable." (i.e. illegal)
Stupid little kiddies.
But at least I got some nice photos there:
Also, what THE HECK is this:
My brother laughed so hard...
Let's see, what else?
Well, she would've been my counterpart if she was interested in the things I am, so she's not exactly my counterpart, lol.
And last but not least...
drumroll
Hooray! But no fps differences whatsoever.
Learn some stuff about 3D geometry, and then apply that knowledge onto a map and you'll pretty much know everything about it.
Nice, it has the bumpiness of ts_untergrund or something.
"It's not about the poly count, it's how you use those polys."
@Windawz
OMG, no. Far Cry comes with 300 to 400 premade models by Crytek.
Also, everytime you start the editor, you get a terrain mesh which you can sculpt vertically.
It's also possible to make something quick and easy in SketchUp, and texture it in 3ds Max and export it to CryEngine.
OMG, no. Far Cry comes with 300 to 400 premade models by Crytek.
Also, everytime you start the editor, you get a terrain mesh which you can sculpt vertically.
It's also possible to make something quick and easy in SketchUp, and texture it in 3ds Max and export it to CryEngine.
It's like this:
1 brush = 1 model.
So, now you have a floor model, a wall model, a ceiling model, a door model, props (chairs, tables etc.), a window model, a stair model etc.
Of course, you can make entire maps from single models, but then the lighting is a bit odd. That's why you can also port GoldSrc maps to CryEngine. 1 map = 1 model. xD
1 brush = 1 model.
So, now you have a floor model, a wall model, a ceiling model, a door model, props (chairs, tables etc.), a window model, a stair model etc.
Of course, you can make entire maps from single models, but then the lighting is a bit odd. That's why you can also port GoldSrc maps to CryEngine. 1 map = 1 model. xD
Actually, CryEngine 1 doesn't have the Half-Life brushes.
BUT, it has its own brushes! In Far Cry 1, models = brushes.
Well, that made me learn more modelling in the first place.
So yeah, it's both: a model and a brush.
BUT, it has its own brushes! In Far Cry 1, models = brushes.
Well, that made me learn more modelling in the first place.
So yeah, it's both: a model and a brush.
Speaking of Sledge, I'd like to point out that the 2D viewports don't refresh on my end. If I move a brush, it moves in the 3D view, but the rest is frozen. Definitely doesn't affect the rest of you, doesn't it?
Ah well, the "advantages" of older hardware.
But the 3-point cutting is just brilliant.
Though, on the course of 2 years it crashed 10 times, in the entity property window.
Ah well, the "advantages" of older hardware.
But the 3-point cutting is just brilliant.
but hey Hammer crashes tooJ.A.C.K. crashes too. :^(
Though, on the course of 2 years it crashed 10 times, in the entity property window.
It's not like Sledge Editor is the only alternative. There are:
- QuArk
- Radiant
- J.A.C.K.
"I may look like a real dumb*** (and that's almost true), but I have never used custom textures in any of my maps."Also... don't feel bad for not using custom textures before. I haven't used custom textures in my maps until the end of my first year of mapping. And the same goes for Source. It took me a while to get to using custom textures.
The same goes for CryEngine. But then, with custom textures I was able to do a lot of stuff. Well, that includes:
Yeah, GIMP has a palette editor, and if you feel limited with the 256-colour palette, you can always switch between indexed and RGB mode, and then save the BMP indexed.
I had a problem (bad colours after indexing) with a tree sprite. Back then I had no idea about changing the mode to indexed, so I used to put BMPs into Wally and then extract them. That made my tree grayscale.
Now I use GIMP.
I had a problem (bad colours after indexing) with a tree sprite. Back then I had no idea about changing the mode to indexed, so I used to put BMPs into Wally and then extract them. That made my tree grayscale.
Now I use GIMP.
Can't you just open Paint.NET and convert them 1 by 1 into 8-bit BMPs?
That's what I usually do. And if I want more control over the colour palette, I use GIMP.
That's what I usually do. And if I want more control over the colour palette, I use GIMP.
I think the Jpeg would get rejected, use an indexed (8-bit) BMP just in case.
I remember accidentally putting a PNG instead of a BMP and it gave me an error.
I remember accidentally putting a PNG instead of a BMP and it gave me an error.
No it's not. It's not made out of tetrahedrons.
It's basically a bunch of triangulated prisms.
Did I mention that it's hollow like a pipe, too?
It's basically a bunch of triangulated prisms.
Did I mention that it's hollow like a pipe, too?
Yup. :3
All of that on my almost-10-year-old laptop. xD
R.I.P. me...
All of that on my almost-10-year-old laptop. xD
R.I.P. me...
Ctrl+Alt+T...
Did someone say curved pillars?
Yeah... without Triangulate I'd waste hours of work...
Did someone say curved pillars?
Also, if you get the "Faces not planar" error, select the errored brush, press Shift+V and then press Shift+Alt+T.
It will save a lot of time compared to using Ctrl+F for individual faces. A.f.a.i.k. there's also a vertex welding command but more on that later...
It will save a lot of time compared to using Ctrl+F for individual faces. A.f.a.i.k. there's also a vertex welding command but more on that later...
Eh, see, the problem about World alignment is that 1 axis (Z, X or Y) will remain as long as the brush is rotated less than 45° in the X or Y axis (I mean, rotated on a horizontal axis).
If it goes over 45° then it will switch the axis to avoid stretching.
Of course, if you put a flat area, cut it up into triangles, and apply the World aligment there, I don't think that Vertex Manipulation will change the projection axis (but if you try to make it vertical with the VM tool, you'll probably get a "texture perpendicular to axis" error or something like that).
If it goes over 45° then it will switch the axis to avoid stretching.
Of course, if you put a flat area, cut it up into triangles, and apply the World aligment there, I don't think that Vertex Manipulation will change the projection axis (but if you try to make it vertical with the VM tool, you'll probably get a "texture perpendicular to axis" error or something like that).
@Windawz
Well, some parts will need to be smoother. :/
I'll have to increase the poly count.
And, umm, how did you discover what I exactly did?
I don't remember typing: "Select a face, then press Shift+F6 and left-click the other faces, and then go back to Lift+Select mode."
Lol.
Well, some parts will need to be smoother. :/
I'll have to increase the poly count.
And, umm, how did you discover what I exactly did?
I don't remember typing: "Select a face, then press Shift+F6 and left-click the other faces, and then go back to Lift+Select mode."
Lol.
2nd cave:
So, I think I'll need to "tessellate" the cave because it looks low-poly with the downscaled textures.
Also, surprisingly, Vis needs less than 10 minutes.
Other than that, this cave will need some elevation, along with a one-way trip down the cave, followed by big pipes.
Also, surprisingly, Vis needs less than 10 minutes.
Other than that, this cave will need some elevation, along with a one-way trip down the cave, followed by big pipes.
If you mean obsession with shadows, I have an obsession with shadows, too.
I once put 6 DynamicLight entities (talking about CryEngine 1) hoping the 6 sharp lights would make a blur effect and give an illusion of 1 realistic light + shadows. I got 6fps, but it was totally worth it.
Hmm... I might also show this:
This is my old school map which I made in 7th grade. This year I decided to give it a facelift because I was going to play CS 1.6 in school. The new one (if anyone's wondering) will be quite different, and will probably come out next year when I get to high school. (see, my elementary is right next to the high school, so I will still be able to work on it, and expand the map into the high school :D)
I'm extremely surprised that AllocBlock didn't even reach 60%.
Though, I'm sure that -notexscale -chop 2 -texchop 1 would work well too.
(well, barely, because hlrad.exe would take a few hours or a day, and it would need a lot of RAM)
I once put 6 DynamicLight entities (talking about CryEngine 1) hoping the 6 sharp lights would make a blur effect and give an illusion of 1 realistic light + shadows. I got 6fps, but it was totally worth it.
Hmm... I might also show this:
I'm extremely surprised that AllocBlock didn't even reach 60%.
Though, I'm sure that -notexscale -chop 2 -texchop 1 would work well too.
(well, barely, because hlrad.exe would take a few hours or a day, and it would need a lot of RAM)
But hey, this kind of resembles the HL2: E2 caves.
@abbadon Sorry, a Shambler would wreck most players:
*the Hell Knight only appears in Hard difficulty
I've always loved space maps. <3
Hmm, that inspires me. I could make a space map for Quake.
Hmm, that inspires me. I could make a space map for Quake.
Looks very nice.
Meanwhile, I added that cave:
I think that this was a common level design technique. You reuse the same area but for a different path, on a different place in that area.
And then, after you pass the cliff, you should enter another cave and then get to the top of the castle where you fight a lot of enemy soldiers and call it a day.
Meanwhile, I added that cave:
And then, after you pass the cliff, you should enter another cave and then get to the top of the castle where you fight a lot of enemy soldiers and call it a day.
Meanwhile... I found a way how to apply the same Z-axis texture projection, for all my desired surfaces:
See the green and yellow lines? Basically, they're parallel to each other, and that's exactly what gives this seamlessness to the cliff texture.
I saw a map like that already, with terrain. Basically, a guy made an island map and it was HUGE! Man...
Anyway, that's where I got the idea of triangular terrain in DooM, so I implemented it into my first and only (yet) DooM map.
And about the complexity of my map:
Well, look at ts_untergrund. It looks complex, but it's not, really. I might pull off the same with this map. Basically, both have lots of triangles.
Anyway, that's where I got the idea of triangular terrain in DooM, so I implemented it into my first and only (yet) DooM map.
And about the complexity of my map:
Well, look at ts_untergrund. It looks complex, but it's not, really. I might pull off the same with this map. Basically, both have lots of triangles.
Windawz, a lot of it is possible. Just make triangular sectors and raise their vertices so that they resemble terrain.
I'd say around 1024 tri sectors.
I'd say around 1024 tri sectors.
@JeffMOD
Oh, you're so wrong. If I play DooM in 1280x800 I can still get to some below-30fps areas.
Though, I could also port 4Way to DooM 2, and the terrain, too!
Oh, you're so wrong. If I play DooM in 1280x800 I can still get to some below-30fps areas.
Though, I could also port 4Way to DooM 2, and the terrain, too!
Hmm, I could add a cave.
And it looks not-so-lit on my phone. :/
I should turn up the lights more.
@Windawz
Of course I'm using J.A.C.K.
Also, look at his face:
That just looks so funny and goofy! XD
@abbadon
Yeah, you mean one of these?
The worst thing about them is that they don't have a trigger target. 
Of course I'm using J.A.C.K.
@abbadon
Yeah, you mean one of these?
Either in the articulator, or the tutorials, I found something related to humour in mapping. It contained stuff about flight companies across Doom, Quake and Half-Life 1. That gave me an idea about what to do next with my Quake map:
First I make the map in Quake, then port it to Quake 2, then to Half-Life 1 and then to Half-Life 2.
It shouldn't take more than a year, no?
First I make the map in Quake, then port it to Quake 2, then to Half-Life 1 and then to Half-Life 2.
It shouldn't take more than a year, no?
But adding new entites would basically be a new mod, right?
Hmm, that could actually be interesting. Imagine a Quake mod which brings HL:DM into Quake. xD
Anyway, I heard of QuakeC but I have no experience in it, nor in C, only typing code from a tutorial into a .cpp file.
And Quake seriously lacks func_breakable, or I'm blind...
Hmm, that could actually be interesting. Imagine a Quake mod which brings HL:DM into Quake. xD
Anyway, I heard of QuakeC but I have no experience in it, nor in C, only typing code from a tutorial into a .cpp file.
And Quake seriously lacks func_breakable, or I'm blind...
I started some Quake mapping:
The 2nd floor hallway...
...after getting swept through.
This is where the teleport leads to.
So, I've realised that mapping for Quake = GoldSrc × 0.5. So yeah, that means that half of the features are gone etc. but that's why it's simpler.
Big thanks to Snehk for inspiring me to actually start Quaking.
Big thanks to Snehk for inspiring me to actually start Quaking.
For GoldSrc "games", yes. But for usual mods, it's 50/50. If your GoldSrc mod is just a simple level pack with 2 new weapons, then it doesn't need Xash3D. Though, you're right about the limitations.
I mean, I was barely able to fit my school map into a 4096^3 space. All entities were inside the space, while some brushwork did slip off into the outer space. ts_untergrund is enormous, and suffers from its size on some locations, too.
I mean, I was barely able to fit my school map into a 4096^3 space. All entities were inside the space, while some brushwork did slip off into the outer space. ts_untergrund is enormous, and suffers from its size on some locations, too.
Darn, that inspires me to make a Quake map in J.A.C.K.
"but i guarantee any 10 year old system can push a decent 400fps"My laptop is almost 10 years old, and I am confident that your statement does not apply on my end.
Even in 640x480!
@Unq
I said it because VHLT is mainstream in GoldSrc mapping. ZHLT is fine too, lol, as long as you've got something that works with the command.
Now, if someone really wants to use those Quake compilers, then I'd say that person is hardcore.
I said it because VHLT is mainstream in GoldSrc mapping. ZHLT is fine too, lol, as long as you've got something that works with the command.
Now, if someone really wants to use those Quake compilers, then I'd say that person is hardcore.
You should use VHLTIncorrect.
You must use VHLT.
Darn, seriously?
Let me find another link...
Edit:
http://forums.svencoop.com/showthread.php/42174-Vluzacn-s-ZHLT-v34-Update
Let me find another link...
Edit:
http://forums.svencoop.com/showthread.php/42174-Vluzacn-s-ZHLT-v34-Update
Mistake:
You're using the Quake compilers.
You should use VHLT:
http://gamebanana.com/tools/5594
Also:
** Parameters: C:\Program Files (x86)\Steam
You probably put the wrong "Base Game Directory" folder. It should target your Half-Life folder.
You're using the Quake compilers.
You should use VHLT:
http://gamebanana.com/tools/5594
Also:
** Parameters: C:\Program Files (x86)\Steam
You probably put the wrong "Base Game Directory" folder. It should target your Half-Life folder.