Forum posts
- Forums
- Posts
- Posted by
Dr. Orange
A quick question: I've decided to give Sledge a chance again, and I noticed auto-selection is off by default. I can't seem to find any option to toggle on auto-selecction, so my question is; How do I enable auto-selection (selection with selection and vertex tool without having to press enter)?
But why not just parent the 2nd entity to the 1st entity directly instead of bothering with a middlehand logic_measure_movement entity?
Try and put Mil_duty_ in the "Sentence Group" parameter of a speaker entity. If that doesn't work, try !Mil_duty_ or !Mil_duty.
We here at the Black Mesa high altitude skyscraper research and administration facility (B.M.H.A.S.R.A.A.F) approves of you taking your time finishing it, and are not at all upset over being almost 3 months after the (presumed (according to me)) schedule.
It could be possible, with a ridicoulusly complex setup of func_tracktrains.
But what about parenting?
I'm just thinking "Those guys who made the game know what they're doing. There's gotta be a good reason for things being how they are."
In Valve we trust.
In Valve we trust.
@urby Actually, what I meant was: "If it is broken, let it stay broken".
Editing the skill config files in any game can be considered cheating.
Whenever I make a mod or something like that, I follow a simple rule: "If it isn't fixed in the official game, there's no reason to fix it yourself."
I guess you could try and use encryption, but eh, who cares really?
Whenever I make a mod or something like that, I follow a simple rule: "If it isn't fixed in the official game, there's no reason to fix it yourself."
I guess you could try and use encryption, but eh, who cares really?
Client/servercommand entites doesn't save between gamesaves as far as I know, instead it saves directly to the config files. If you were to get something like "headshot does 8762784298 times the damage" and then create a new game, that attribute would still be there.
You're welcome.
For HL1: You need to add a master for it to work. The master is a multisource entity being targeted by the trigger_once and defined in the func_button's "master" keyvalue.
For Source: Tick the button's "Start Locked" flag, then make the trigger send it an "UnLock" output.
For Source: Tick the button's "Start Locked" flag, then make the trigger send it an "UnLock" output.
Is the viewmodel lit differently from worldmodels? Becuase I made a map with a low sunlight angle, so standing on a spot where the floor was dark, but realisticly the Sunlight would still be in that 3D space made the viewmodel become lit with the sunlight color.
I'm all up against hacks.
Argument re-validated.
Argument re-validated.
Models in HL1 aren't lit per vertex. They have a single lighting value based on the lighting at their model origin. The origin is usually at the center of the model, but for monsters and gravity affected object it's usually at the bottom of the model.
If you have tried to light up the floor, you should try and put a light in the middle of the version. If it doesn't work then it may be an error not related to the lighting on it's own.
If you have tried to light up the floor, you should try and put a light in the middle of the version. If it doesn't work then it may be an error not related to the lighting on it's own.
I released this map yesterday: http://twhl.info/vault.php?map=6057
If you are looking for maps and such, you may post a link to this mapon your site. I rather don't want you to re-host it so I can keep track of downloads and have one central download page. But feel free to put a link to my map on your site. I need the publicity if my maps are ever going to be popular.
If you are looking for maps and such, you may post a link to this mapon your site. I rather don't want you to re-host it so I can keep track of downloads and have one central download page. But feel free to put a link to my map on your site. I need the publicity if my maps are ever going to be popular.
Yeah, but using map commands (Point_client/servercommand) entities is kind of a hacky way to do it.
But if it's supposedto be in the sourcemod format anyway, I Think it's better to edit the skill configuration files.
But if it's supposedto be in the sourcemod format anyway, I Think it's better to edit the skill configuration files.
Yeah, that's what I commented on. I was chocked you didn't create 3D geometry instead of using 2 dimensional textures that looks like 3D geometry but actually isn't.
Wait a second... It uses actual 2D images to create false 3D? And not 3D geometry to create fake 2D?! Where's this world going?
Do you think it's possible to use that to generate random maps?
I'd create a map. For a game. I'm going to do that now.
But isn't shield and armor the same thing?
Overlapping anything just means to put it in exactly the same place as something else.
Masters are multisource entities defined in another entity's "master" field. An entity will not activate unless it's master have been triggered.
Masters are multisource entities defined in another entity's "master" field. An entity will not activate unless it's master have been triggered.
Grouping in Hammer doesn't affect the in-game render. However, a lot of complex, overlapping shapes may cuase serious issues.
You should turn that into a func_detail entity by pressing ctrl+t.
However, I don't Think that overlapping brushes is such a good idea. It will probably split it up into an unnecessary amount of polygons (rendered triangles) and may cuase serious issues. Try to avoid overlapping brushes whenever possible.
A single look on that image tells me it won't work in-game.
EDIT: When I wrote and posted this, the two above posts hadn't been posted yet, so sorry for any repeated information.
You should turn that into a func_detail entity by pressing ctrl+t.
However, I don't Think that overlapping brushes is such a good idea. It will probably split it up into an unnecessary amount of polygons (rendered triangles) and may cuase serious issues. Try to avoid overlapping brushes whenever possible.
A single look on that image tells me it won't work in-game.
EDIT: When I wrote and posted this, the two above posts hadn't been posted yet, so sorry for any repeated information.
Hmm... Sounds really interesting. And advanced.
Though you shouldn't use specific key binds when talking about... Keybinds. Even if it's the default keybinds, not everyone may use it, and some who doesn't know the defaults might actually get confused for real.
Anyway, what happens if you hold down all of the movement keys at once?
Though you shouldn't use specific key binds when talking about... Keybinds. Even if it's the default keybinds, not everyone may use it, and some who doesn't know the defaults might actually get confused for real.
Anyway, what happens if you hold down all of the movement keys at once?
But how does the camera follow the player? And how does the player move in a top-down view? I guess we'll all know when this is released, but a full technical explenation would also be appreciated.
But... How are you supposed to draw a 3D HUD onto the 2D screen? I know that the script_intro entity can do some work of drawing 3D geometry onto the main player camera view, but I think it only can draw additevily, multiply and alphatested, so it would be impractical for this...
Really, you should make this as a mod format and include developer commentary.
Really, you should make this as a mod format and include developer commentary.
But it's paid. And not everyone have the availability to pay for stuff via their computers. But there are multiple good free audio editors on the internet.
Well, probably any sound editor that can save 8-bit files and allow resampling should work. Wich should be almost every audio editor available.
Just load up a sound file, set it's sample rate to 11025hz, then re-save it as a 8-bit wav file.
Just load up a sound file, set it's sample rate to 11025hz, then re-save it as a 8-bit wav file.
It could possibly be that the sounds are formatted/sampled the wrong way. For instance, Half-Life only have support for 8-bit sounds sampled at either 11025hz or 440something hz.
Some of the new sounds may use higher quality bitrates and samplings that Half-Life doesn't support.
Some of the new sounds may use higher quality bitrates and samplings that Half-Life doesn't support.
Of course I know this is not official yet. Though that's a very loose defintion of "official". If you meant official in this thread, then it probably is. If you meant official on this website, then probably not. If you meant official in the overall Source and GoldSource engine world(?) then this website might not even be official.
I just asked becuase I was curious if these "unofficial" competition rules allowed it.
I just asked becuase I was curious if these "unofficial" competition rules allowed it.
Just a question about the rules, wich I did ask earlier in this post, but didn't get a clear answer from whoever came up with this idea.
Would it be against the rules to remake a level from a game wich was made before 2000 for a game wich was released after 2000, but the map was also made after 2000.
Example:
The original map is from a game made in 1995. However, 6 years later in 2001 an update was made to the game adding an additional map. In 2005 a sequel was released, and I want to recreate that 2001 map in the 2005 sequel.
Would that be allowed, if the map itself is made post-2000, but the game it was made for was made pre-2000?
Would it be against the rules to remake a level from a game wich was made before 2000 for a game wich was released after 2000, but the map was also made after 2000.
Example:
The original map is from a game made in 1995. However, 6 years later in 2001 an update was made to the game adding an additional map. In 2005 a sequel was released, and I want to recreate that 2001 map in the 2005 sequel.
Would that be allowed, if the map itself is made post-2000, but the game it was made for was made pre-2000?
I wonder if babies would be a good video game... How that now is supposed to work.
You'll probably have to download a custom prefab library and fgd file.
I think the closest there is to a role play game on the Source engine would be Dota 2.
For the pre-2000 remake, does the level itself have to made before the year 2000, or just the game it is for?
It is possible to create visuals outside of the map up to 16 times bigger then the actual map using 3D skyboxes.
However, this is not playable area. There's no way to make playable maps bigger then the current map size I'm afraid. Though, changelevels aren't that bad. They're really short and shouldn't be interrupting gameplay too much in a singleplayer game.
But if you are trying to make an open World multiplayer game, or open World game in general, I'm afraid the Source Engine isn't what you're going to need. The engine was designed for linnear singleplayer games and round based multiplayer games.
I hope you find this information usefull.
However, this is not playable area. There's no way to make playable maps bigger then the current map size I'm afraid. Though, changelevels aren't that bad. They're really short and shouldn't be interrupting gameplay too much in a singleplayer game.
But if you are trying to make an open World multiplayer game, or open World game in general, I'm afraid the Source Engine isn't what you're going to need. The engine was designed for linnear singleplayer games and round based multiplayer games.
I hope you find this information usefull.
No it doesn't. It's possible to use a skybox texture to create a low quality illusion of distant buildings. It's also possible to create Buildings outside the playable area to extend what can be seen, and making several map files.
The point is: While you can't really create wide open areas, you can create the illusion of wide open areas.
The point is: While you can't really create wide open areas, you can create the illusion of wide open areas.
As you said with your example, using textures in a creative way can yeild interesting result. You wouldn't believe how many metal structures in Half-Life actually uses concrete textures.
Also, creative brushwork can make the entire difference.
By the way, the level size doesn't depend on wheter the editor can make it larger or not. It's a limit within the game itself.
Also, creative brushwork can make the entire difference.
By the way, the level size doesn't depend on wheter the editor can make it larger or not. It's a limit within the game itself.
I hope that follow-up mod will be for Source engine. GoldSource have it's well known restrictions, and a lot of more challenging and complex gameplay can easier be made. It's just my personal opinion though, so don't feel forced to do that.
It cuases a mistmatch between world geometry and entities, doesn't it?
Move the trigger_changelevel then. And if that don't work, you should check the most fundamental and important part of any changelevel:
Does the info_landmark and trigger_transition have the same targetname, and is referenced in the trigger_changelevel's landmark field, and are they in the same position relative to the geometry in both maps?
Does the info_landmark and trigger_transition have the same targetname, and is referenced in the trigger_changelevel's landmark field, and are they in the same position relative to the geometry in both maps?
All landmarks in between level changes must be named the same.
That "ERROR: couldn't open." seems to be related to the loading of that save file. It may be corrupted, but I don't think it should matter, I run into those all the time.
The VModEnable error is safe to ignore.
That "ERROR: couldn't open." seems to be related to the loading of that save file. It may be corrupted, but I don't think it should matter, I run into those all the time.
The VModEnable error is safe to ignore.
Have you checked that texture lock is on? It's the button with "tl" on it in the top-bar.
If people redistribute stuff, isn't that copyright infrigment then?
The trigger_changelevel entity must exist in both levels, making a two-way level change even if you only want it to be one-way. You can check the "use only" flag or put it in an inaccesible room if you don't want the player to be able to return to the previous level.
Don't you think it would make sense if the fulle version of TWHL-tower would be available on the webpage of the same name? Or at least a link to it?
I may have something of a bad new about my level. I tried to include fog in it, but it wouldn't work for me, so I left it there in the belief no-one else would have fog either. Now I recently played the demo levels for Spirit of Half-Life, and it seems like my computer is in-capable of rendering the fog. I hope this works as an excuse if the fog is bad, but I really thought the fog was broken in the game, and wouldn't work at all.
As far as I've experienced it, leaks sometimes make RAD only compile direct lighting, and sometimes make it not run at all. The latter I've never experienced myself, but seen in other's maps. I guess it depends on... something I don't know about.