Forum posts
im useing sony sound forge 7.0 here.best ever. i got pirate with cd key from "ares p2p sharing"
can anyone give me a few good links to a site with good scenery or prop models? like indoor and outdoor kinds. and ill give all the modelers credit for their contributions.
Thanks a bunch!
Thanks a bunch!
no thats not it! i think i need to put the models in the valve folder too. its a little touchy. ill make my map before i reformat my computer again.. damn piece of unholy IBM shit!
well thanks for you help
well thanks for you help
dude you know i would help you if i could, but im just still learning on scripted sequences. ill try find out.
well thanks alot. i coulda wrote that dialog..:( anymore help? i desperately need to fix this or my map will never finish in 2 weeks 
i just set up my hammer 3.5 to cs 1.6. never done that b4, i just used to compile into cs 1.5, but i wanted to see the models. ok i extracted all the cstrike shit from the counter-strike.cgf with the help of cgfScape.
and now when i try to compile my map it works, but when it trys to load in cs 1.6 it freezes and i have to turn off my comp.. i also tried to load the map without hammer on and it still freezes cs. do i need to move some models or sprites or something to the hammer folder?? any ideas would greatly be appreciated..
Aloha dudes.
and now when i try to compile my map it works, but when it trys to load in cs 1.6 it freezes and i have to turn off my comp.. i also tried to load the map without hammer on and it still freezes cs. do i need to move some models or sprites or something to the hammer folder?? any ideas would greatly be appreciated..
Aloha dudes.
i was trying to find the tread that tells how to setup cs 1.6 for hammer. but i cant find it. can you give me the link or something plz.. thnx 
it still doesnt tell me how to make it so onlt the gravity changes in that 1 room
im trying to make a romm that when you go in it. it will either be lots of gravity or very little. how do i pull that off without changing the whole maps gravity. only the one room? what entities?, and where? do i need map perimeters?
i bet Captain P knows what to do.
i bet Captain P knows what to do.
you do know that you could have just use invisble wab tex. on the sides of the water blocks and then group them and it would have worked perfectly. just thought youd like to know that.
do what i did when that happened to me.. i tried everything even reformatting my HD. that didnt work so i just stopped for 3 months. then i tried again and BLAM! i can map again! super wierd! maybe its karma? kill any animals lately? maybe you should start to. 
you mean like it would be sound waves.. but only their lasers right.? and still deadly. hmmm. ill try to do that 1 and ill tell you if its possible.
hey i have the full sony sound froge 7.0 and id be willing to make custom sounds for you.. just tell me what kind of sound you would like to hear, and ill make it then you can see if im good... oh ya!.. how do you put the picture next to your name??
thanks to whom? :
yes i did make sure it was. are you frech by any chance? colour?? oh well ill try to brainstorm it all over again and remake the damed detailed decals. any more help would be nice....
thanks toonton
thanks toonton
well ive never used goldwave before, but it should be partly the same as sound forge 7.. when you have you mp3 converted to a .wav ( you will want to delete the converted .wav file after youre done cuz its about 30mb just so you know.) then select the wave on the clipboard or new project in your program.. then just simply save it as a smaller .wav file ( not compressed, will not play right ) make sure that its 8bit mono and then save it. the file should be just about 567k's big then you can either just put it in ambient_generic or go back in the sound program select the newly finished smaller .wav file and put cue, or repeat point after the end of the song. thats all there is to it. ( oh ya! and save the file into the valve/sound folder.
hope it helps your prob and my writers cramp.
hope it helps your prob and my writers cramp.
i was wondering why i try to make a new custon decal for my map and i save it in decals.wad as " {strwy2theseahonk " which is transparent in " wally ". then i put it on the wall in hammer 3.4 and when it compiles i can see all the white around the decal.. why is that? do i need to make it a certain way?? there are no tutorials for making your own map decals.. i know i already searched.
thanks
thanks
hey! if i didnt tell him what i had he woulda done the same thing anyway. i just made it easier for others. like your sapose to do..i so sapose i coulda to him to download a crappy free trial .wav editor or buy a $300 program. but not everyone has to take my road, personal choice!
yyes you can have a song. i did in 2 of my maps. i use a pirate version of sony sound forge 7 and i convert the mp3 to wave then to a 8bit mono wave file which is only 567k's big. ps. i downloaded sound forge 7 and keygen from Ares p2p shareware
i would look through the log file and upload it in hammer to pinpoint the leak and block the hole with something like a brush.. You can't use an entity brush because they will cause more leaks. then your map will probobly be too dark cuz you were trying to make it darker but it didnt work. And then your map will leak because you put a light in the void and the roof is too short, but I think it should be Ok.
if your compiling with nems batch compiler you should turn off skyfix! that will fix all your problems.
The only reason it looks like the scale is huge in my bad quality pic. is because im crouching to give a better view!
ok ill try that! thanks!
well i guess cs just sux ass! but i dont know anything about how to make halflife entities :*(
how do i rename the lights.rad? and where do i put it?...and what is texlighting and how do i use it??
sorry its a little dark. must have my gamme alight higher then i thought
i was wondering if i can make a hostage entitie walk into a room and a piece of roof falls on him.. can that be done in counter-strike?? and how would i do that?? 
heres a quick demo. i made it and all the wads, except for the light in 1hr. while eating lunch P.S. not to my full potential. oh ya! how do you use zhlt fade and falloff in hammer for lighting effects???
http://img18.exs.cx/img18/851/horror10007.jpg
P.S. not to my full potential. oh ya! how do you use zhlt fade and falloff in hammer for lighting effects??? http://img18.exs.cx/img18/851/horror10007.jpg
Damnit!! i cant post any screenshots up here! i dont know how to get them on the web to do it...
good day!
good day!
i was wondering if you guys could tell me how i post pics from my computer.? 
whenever your ready to start mario mod. im ready to map for you!
i wanted to make a scripted sequence where a scientist walks into a room and gets crushed by a piece of falling roof.. how would i do that? examples? steps? amount of what entities needed? :
check what you have all of you setting paths set to. especially the wads.
ya dude! if you need a mapped im available. ill make a quicky map like only 2 hrs. long then place some screenshots up here for you to see..
Aloha
Aloha
ya id like to map for you! im pretty experienced and know how to fix any error for mapping. when youre done with the wads could you send me them with a description of what you want and how you would sorta like it, and ill make it as Groovy as possible ASAP.. thanks
OH YA! i like the fact that drunk monkey boy is scared of me. muahahahahahaha...... hahahaha....haha....ha........................ha
ok whatever, just wanted to add that.
rat>hawaii< email ----> rat808hawaii@hotmail.com, or, clanmaster_awd_@hotmail.com
OH YA! i like the fact that drunk monkey boy is scared of me. muahahahahahaha...... hahahaha....haha....ha........................ha
ok whatever, just wanted to add that.
rat>hawaii< email ----> rat808hawaii@hotmail.com, or, clanmaster_awd_@hotmail.com
thanks dude ill try that right now, and ill put ur name in stone
that makes sense but, i still want to put a model in my map but everthing ive tried doesnt work. if you would be so kind as to try to put a model in a junk small map and tell what and how you did it. i would set youre name in stone in my map.
ok! if i put the hl.fgd in cs hammer and make a monster, or lets say i try to put a car model in there how would i do it.. i tried with monster_furniture andnothing showed up in the map.. what can i do?
i try and try and try to insert a car model into cs using cycler_sprite like i was told but it doesnt work! can any of you test it out and see what i have to do to get a model into hammer for cs.. [P.S. it would kick ass if you could tell me the steps and what you did.]
thanks again
thanks again
peeps keep telling me that i can use the cycler sprite to put a model in my cs map.. but when i put the correct pathname and try to load it up, it says "mod_num?error cstrike/models/chevvy.mdl not found" i was wondering if its my comp or if i just cant use cycler_sprite to insert models?
i just tried to use the cycler sprite but it didnt work for cs.. i tried having the .mdl in the hammer folder, the cstrike folder, and the valve folder but it says .mdl not found.
i just downloaded some models from my friend, but i dont know how to put them into my map? i have beer cans and a car. what entitie do i use and what do i put in the properties?
thank you guys have been helpful!
thank you guys have been helpful!
hey id like to make some maps for your mario mod and all..i think its about time that theres a kick ass mario for computer! just send me the wads and what kinda map and what you would like the layout to kinda be and ill do the rest! rat808hawaii@hotmail.com
peace out dude!
peace out dude!
im in the middle of a map and im trying to put in the horror scream to play throughout the level, but it wont loop. it just stops. whats wrong? and i didnt select the Not looped box in flags either :
i was wondering if there is a way to start out right on a piece of ground and then with a trigger make the ground dissapear right out of underneath you? is it possible? or do i have to keep this map idea in my head?
yyes it would be alot more helpful with the right info.. does it have a message pop up before it crashes? what is it? does it load cs then crash? " chubbs is sad. needs more source release. "
thanks man! you guys sure reply fast!
i was making a map yesterday and i saw the triggered gravity under the brush entities.. i was wondering how i can actually make it have a set gravity for the map?? can you guys help me out, and tell me the step i might take to getting that effect??
thanks!
thanks!