VERC: The Rustmill Effect Last edited 5 years ago2019-04-21 12:46:13 UTC

You are viewing an older revision of this wiki page. The current revision may be more detailed and up-to-date. Click here to see the current revision of this page.

Introduction

The "Rustmill" effect refers to the effect created in the Rustmill map. In it, there was a "map board" that consisted of an overhead view of the level. It was divided into sectors that would light up when someone was in that sector. By shooting a sector on the map board, you would be teleported to that sector of the map.

This effect is divided into two different systems - the teleport system and the signal system.

Setup

User posted image

Teleport System

The teleport system is pretty simple.
User posted image
When you shoot the button_target entity, it activates the first multi_manager. This multi_manager first activates a trigger_changetarget which changes the target of the trigger_teleport to the appropriate info_teleport_destination. Then, 0.1 seconds later it activates the second mutli_manager. This multi_manager first activates a multisource entity (which is the master of the trigger_teleport, therefore enabling the teleporter), then 0.1 seconds later it activates the multisource a second time, disabling the trigger_teleport.

In the example pictured above (taken from the tutorial example map), the player must be standing on the teleporter pad that sits in front of the map board, otherwise, he will not teleport anywhere.

The teleport system makes use of the following entities:
User posted image

Signal System

The signal system is also extremely simple. Each destination that you want to teleport to will reqiure its own trigger_changetarget, multi_manager (#1), and info_teleport_destination.

Each area that triggers a sensor will be covered by a trigger_multiple entity. Every second (its Delay before reset (wait) is set to 1) it triggers a multi_manager. The multi_manager immediately triggers the sensor (a func_wall_toggle) turning it on, then triggers it again 0.5 seconds later to turn it off. (Each sensor's func_wall_toggle has its first spawnflag checked so it "Starts Invisible".

In the example picture above, when the player is standing within the trigger_multiple #2 entity, the func_wall_toggle #2 sensor will flash. When this sensor is flashing, it means the player is ready to be teleported by shooting the map. If the player were instead standing in trigger_multiple #1, the func_wall_toggle #1 sensor would be flashing.

The signal system uses the following entities:

Notes

If you need a visual example of the above or just want to see it in effect quickly, download the example map provided below. It's a simple map allows the player to teleport to four different areas of the map. Below are a few notes.

Example

For a more concrete illustration, check out the example map linked below.
This article was originally published on the Valve Editing Resource Collective (VERC).
TWHL only archives articles from defunct websites. For more information on TWHL's archiving efforts, please visit the TWHL Archiving Project page.

Comments

You must log in to post a comment. You can login or register a new account.